[Language]
Language=한국어
help_declare=소개
help_feature=재생
help_monitor=실시간보기
help_device=장치 관리자
help_file=파일 관리자
alarm=경보
camera_error=Cannot use camera
Disagree=Disagree
EE_IPC_FORBID_REMOTE_LOGIN=Disable remote login
TR_Connecting=Connecting...
TR_Copy_Success=Copy Success
TR_Disagree_Can_Not_Continue=You need to agree to the relevant agreement to use the software
TR_No_Permission_ACCESS_FINE_LOCATION=No location permission! \n\n used when getting WiFi status list!
TR_No_Permission_CAMERA=No permission to use the camera! \n\n use camera function when scanning QR code!
TR_QRCode_Is_Expired=QR code has expired (QR code is valid for 30 minutes)
usename_error=User name is not valid (User name is composed of 4-32 bit Chinese, English and numbers)
xlistview_header_hint_normal=새로고침
xlistview_header_hint_ready=새로고침해제
xlistview_header_hint_loading=로딩중 ...
xlistview_header_last_time=마지막시간 새로고침:
xlistview_footer_hint_normal=더보기
xlistview_footer_hint_ready=더보기해제
username=사용자 ID
main_declare=알림
recordmode=녹화모드
yl=프레스코
cd=길이
always=항상
close=닫기
recordtype=녹화유형
hardware_version=하드웨어 버전:
software_version=소프트웨어 버전:
dialog_default_title=메시지!
dialog_ok=확인
dialog_cancel=취소
LOADING=로딩중...
Pwd_or_UserName_error=ID 또는 비밀번호가 잘못됨
Delete_dev_s=장치 삭제 성공
Delete_dev_e=장치 삭제 실패
UserName=사용자 ID
Password=비밀번호
KeepPassword=사용자 기억
AutoLogin=자동 로그인
Register_User=사용자 등록
Modify_pwd=비밀번호 수정
Other_Ways_Login=다른 방법 로그인
LocalLogin=직접 로그인
DirectLogin=직접 로그인
Direct_Delete_failed=직접 연결 모드에서 장비를 삭제할 수 없습니다
Cloud=클라우드 로그인
NO_Internet=네트워크 연결안됨
UserNameEmpty=사용자ID 비여있거나 영문 숫자가 아님
Invalid_Username=사용자 ID는 영문과 숫자 조합 길이는 4~32
Invalid_DeviceName=장치 이름의 길이는 255 안
Invalid_Password=비밀번호 오류
User_not_exist=사용자가 존재하지 않습니다
Confirm_Password=비밀번호 확인
Confirm_new_password=새 비밀번호 확인
Email=이메일
Cancel=Cancel
Error_Warning=오류
Info_Error1=귀하의 정보는 충분하지 않습니다
Info_Error4=정확 한 포트 번 호 를 입력 하 세 요
OK=확인
FDR=안면 검사
Invalid_Email=잘못된 이메일 주소
Password_not_same=암호는 동일해야합니다
Register_failed_check=등록 실패 귀하의 정보가 중복 또는 잘못입력 다시입력하세요
Register_Failed=등록 실패
Old_Password=기존 비밀번호
New_Password=새 비밀번호
New_Password2=새 비밀번호 다시
Password_empty=비밀번호는 공백 또는 잘못된 문자를 사용할 수 없습니다.
Password_changing=비밀번호 수정 …
Modify_pwd_failed=비밀번호 수정 실패
Modify_pwd_success=비밀번호 수정 성공
Device_Operation=장치 작동
Edit=수정
Delete=삭제
Device_Name=장치 이름:
Device_Name2=장치 이름:
Enter_Device_Name=장치 이름
SerialNumber2=시리얼 넘버:
Enter_SerialNumber=시리얼 넘버 입력
Enter_Device_Info=시리얼넘버/IP/DDNS
Enter_IP_Domain=IP/DDNS
Scanf_IP=포트
DMZPort2=HTTP 포트:
DMZPortOptional=HTTP 포트입력 (선택 사항)
IP2=IP:
Enter_Device_IP=입력 장치 IP
Port2=포트:
Enter_Device_Port=장치 포트
UserName2=사용자:
Enter_LoginName=사용자(기본 admin)
Password2=비밀번호:
Enter_LoginPassword=비밀번호(기본은 빈칸으로 비워두세요)
Saving2=저장중...
Logining2=로그인중…
DeviceList=장치 리스트
AddCloudDevice=장치 추가
Agree=Agree
Serial_Num=시리얼 넘버
Invaild_SerialNum=잘못된 시리얼 넘버
Adding_Device=장치 추가중...
IP_Address2=IP 주소:
AddDevice=직접 추가
Rapid_Configuration=WiFi 구성
SerialNum2=시리얼 넘버:
NetPort2=Http 포트:
Searching2=찾는중...
Select_All=모두 선택
Add=추가
No_device=장치 없음
Device_List=장치 리스트
Local_Records=스마트폰에 녹화
Cloud_Records=云录像
LocalAlbum=스마트폰 앨범
Push=스마트폰 푸시 알림
Main_Menu=메인메뉴
Select=선택
Select_Items=항목 선택
Delete_selected2=선택한 항목을 삭제 하시겠습니까?
Save_selected2=선택한 항목을 저장 하시겠습니까?
Save=저장
Save_Success=저장 성공
Save_Failed=저장 실패
Settings=설정
Update=업데이트
Update_title=새 버전 찾기
Help=도움
Cache_Clean=캐시 청소
Version=버전
XMEye=XMEye
Clean_caches2=당신은 캐시를 청소 하시겠습니까?
Version_is=버전은
VideoRemote=원격 비디오
Iris=조리개
Zoom=확대
Focus=초점
Invalid_Operation=잘못된 동작
Channel=채널
Channel2=채널:
AllChannel2=모든 채널
Open_failed=열기 실패
Timeout=시간 초과
Nopower=권한 없음
Catch_image_success=스냅 샷 이미지 저장 성공，여기서 사진 저장
Catch_image_success_ios=스냅 샷 이미지 저장 성공
Catch_image_failed=스냅 샷 실패
Reconnect_success=성공적으로 재 연결
Get_alarm_cfg=알람 설정 가져 오기
Menu=메뉴
Set_alarm_cfg=알람 구성 설정
Get_cfg_failed=구성 실패
Motion_detection=모션 감지
Video_block=영상 차단
VideoLoss=비디오 손실
LocalIO=지역 경보
Wireless_Alarm=433 알람
Video_loss_alarm=영상 손실 경보
Show_alarm_information=디스플레이 알람 정보
Recording=녹음
Off=끄다
On=켜다
Saving=절약
Length=녹화시간 최대 길이
Prerecord=사전 미리 녹화 시간
Main_stream=메인 스트림
Resolution:=해결:
Frame_Rate2=초당 프레임 속도
Definition2=선명도
Voice=오디오
Video=비디오
Resolution=해결
Sub_stream=보조 스트림
Loading_Cfg2=구성 가져 오기 …
Configure_Alarm=알람 설정
Configure_Image=이미지 설정
Configure_Memory=HDD 메모리 설정
Configure_Video=녹화 설정
Configure_Encoding=인코딩 설정
Modules_Config=설정
Remote_View=재생
About_XMEye=소개
IP=IP
Yes=예
Search=찾기
Search_device=검색 장치
Search_function=검색 기능
Search_prompt=장치 이름이나 일련 번호를 입력하여 목록에서 장치를 검색 할 수 있습니다. 이 기능이 필요하지 않은 경우 일반 설정에서이 기능을 끌 수 있습니다.
Off_search_prompt=이 기능을 켜거나 끄면 장치 목록의 검색 기능이 영향을 받으므로 계속 하시겠습니까?
Record_success=녹화 성공적으로 저장됨
Record_Time_Too_Short=비디오 시간이 너무 짧습니다.
Open_channel_s=버퍼링…
Last_updated2=출시일
Device_Version=장치 버전
Software_Version=소프트웨어 버전:
Running_Time=운영된시간
Video_Mode=네트워크 모드
Second=둘째
Minite=분
Seconds=초
Unit=단위
m=분
h=시
s=초
Back=뒤로
Logout=로그아웃
Real_Time_Video=실시간 비디오
Check_Update=업데이트 확인
Send_Log=로그 파일 보내기
Login_Error=로그인 오류
Invaled_UserName=잘못된 사용자 이름
Server_failed=서버 연결 실패
Device_not_online=장치 인터넷 오프라인
Device_not_online2=현재 장치를 찾을 수 없다(로그아웃 후 다시 로그인 해주세요)
Software_version_error=소프트웨어 버전 에러
P2P_Error=P2P 실패, IP 모드 사용 가능합니다.
Confirm=확인
Version_newest=최신 버전인가, 로컬 파일 업그레이드를 선택할 수 있습니까?
Version_newest_user=이 버전은 최신버전입니다
Alarm_function=알람
Alarm_video=알람 녹화
Alarm_normal=Ordinary video
Alarm_picture=알람 스냅 샷
Alarm_Sensitivity=민감도
Alarm_Anvanced=높음
Alarm_Middle=중간
Alarm_Lower=낮음
Wireless_alarm=외부 경보 장치
IP_or_domain_name=IP 또는 도메인 이름
Unknown_Error=알수없는 오류
EE_DVR_SDK_UNKNOWNERROR=알수없는 오류
Clean_cache_success=캐시 지우기 성공
Clean_cache_faild=캐시 지우기 실패
Register_Success=성공적으로 등록
Reconnecting_on_loss=다시 연결
AM=오전
PM=오후
Loosen_to_refresh=해제 새로 고침
drop_down_refresh=당겨 오기 새로고침
Configure_success_reboot=재부팅 성공
Video2=비디오:
Login_Timeout=로그인 시간 초과
Alarm_Infomation=알람 정보
Serial_Number2=시리얼 넘버:
Software_Version_Num2=소프트웨어 버전 번호:
Device_Version2=장치의 버전 번호:
Update_Time2=마지막 업데이트 시간:
RunTime2=실행 시간:
Push_Settings=알람 메시지
Video_Mode2=비디오 모드:
Transmit_Mode=포워딩 모드
P2P_Mode=P2P 모드
Transmit_Mode_status=HD 비디오 전송 모드에서 사용할 수 없습니다.
NO_DEVICE=장치 없음
SERVER_FULL=서버 폭주
File_List=파일 목록
fileListButtonTitle=파일
timeListButtonTitle=시간
Not_found_file_list=파일 리스트 없음
seleceted_time_for_download=다운로드할 동영상 기간,시간을 선택하십시오
Stop_Download=다운로드 정지
Stop_Download_confirm=다운로드 정지 하시겠습니까?
Download_Logout=다운로드중 나가기 확인?
Wait=대기
ClickDownload=다운로드 클릭
Done=완료
Bad=가장 나쁨
Poor=나쁨
General=보통
Good=좋음
Better=더 좋음
Best=최고
Decode_Setting=디코딩 설정
Soft_decoding=소프트 디코딩
Hard_decoding=하드 디코딩
VerSion_TooLow=오래된 버전
Device_NotExist=장치가 존재하지 않습니다
Choice_DecodeMode=디코딩 모드 선택
Sn_Invalid=올바른 일련 시리얼번호를 입력해주세요
IP_Invalid=올바른 IP / 도메인 이름을 입력하십시오
Info_Invalid=올바른 시리얼넘버/IP/도메인을 입력하세요
Waiting2=실행중, 잠시 기다려주세요 ...
Download=다운로드
Start_Download=다운로드 시작
Download_Complete=다운로드 완료
Download_Failed=다운로드 완료
Click_To_Choose_Time=시간을 선택하려면 여기를 클릭하십시오
Video_Not_Found=영상을 찾을 수 없습니다
File_Exists=파일이 이미 존재
Time_Not_Equal=시간은 동일 할 수 없습니다
Default_Password=비밀번호(기본은 \'admin\')
Jump=스킵
No_Push_Pic=사진을 찾을 수 없습니다
ON_AlarmCb=경고 알림을 한다
Video_Loss=영상 손실
Storage_NotExist=저장 장치 없음
Storage_Failure=저장 장치 오류
Storage_LowSpace=저장 공간이 부족
Video_Analyze=지능형 분석
IPC_Alarm=IPC 알람
Local_Alarm=Local 알람
Start=시작
Stop=멈춤
Wifi_Pwd=WiFi 비밀번호
Wifi_Pwd_Is_Empty=귀하의 무선 랜 암호를 입력하세요
Please_Link_Wifi=WiFi 연결 후 계속하십시오
Frequency_support=죄송합니다. 5.8GHz WiFi는 지원하지 않으므로 2.4GHz WiFi를 사용하십시오.
Confirm_Lamp=무선 공유기 확인
Confirm_Lamp_Content=휴대 전화와 wifi 공유기 거리를 확인하십시오.
Confirm_Lamp_Content_2=녹화기 연결된 무선 wifi 공유기와 휴대전화 거리를 2m로 내로 해보십시오.
Operating_Device=장치 작동
Operating_Device_Content=오랜 시간동안 SET 버튼을 눌러 빠르게 깜박이게합니다.
Operating_Device_Content_2=일부 제품 연결하기 위해서 필요하다.
All_Done=위의 작업을 모두 완료
Loading_Config=구성….
Please_Confirm_Content=위의 작업을 완료했는지 확인하십시오.
Enter_Device_Name2=장치 이름 (기본값은 시리얼 번호입니다)
Button_Convenient=버튼을 누르는게 불편하다면 여기를 클릭하세요 here
WiFi_Config_Failed=구성 실패, wifi 암호와 장치의 운영을 다시 화인하세요.
Quick_Config_Failed=검색 실패
Go_To_Direct_Config=직접 연결 구성하시겠습니까?
Direct_Link_Device=장치를 연결하는중, 잠시 기다려주십시오
Wifi_Connect_Failed=wifi 연결실패, 스마트폰에서 wifi가 되는지 확인해주세요.
Wifi_Search_Start=공유기 설정 정보를 보내는중
Wifi_Search_Find_Device=장치는 공유기에 연결됬다
Wifi_Search_Wait_Device_Connect=장치 온라인을 위해 기다립니다.
Wifi_Search_Device_Connected=장치가 온라인 상태입니다.
Consumption_Warning=3G/4G등 네트워크 과금에 주위하세요.
Copy_Device=복사
Share_Device=친구에서 장치 정보 보내기
Checking=확인 중 …
Transmit_Mode_Win_Type=전송모드에서는 오직 하나의 채널만 지원
Info_First=포트
Device_Update_Type=장치 업그레이드
Device_Update_Never=안한다
Device_Update_Wifi=WIFI
Device_Update_Auto=자동
Device_Default_Stream=비디오 스트리밍
Device_Stream_Auto=자동
DeviceSelect=장치 선택
State_Cannot_Play=제한됨, 제발 더블클릭
Auto_Highlight=자동 하이라이트
Auto_SynTime=자동 시간동기화
Copy_Complete=클립 보드에 복사됨
Initing=시스템 초기화됨
Can_Upgrade=업데이트 할 수 있습니다
Downloading=다운로드중...
Downloading2=완료
Uploading=업로딩중...
Is_Been_Updated=업데이트중입니다
Update_Success=성공을 업데이트 지금 장치를 다시 시작합니다.
Update_Failed=업데이트 실패
Reconnecting=성공적으로 업그레이드 다시 연결되고 있다
Device_Update_Success=장치 업그레이드 성공
Ask_Device_Date=당신은 2015년 6월 이전 생산된 기기를 연결을 원하십니까?
Ask_yes=예
Ask_no=아니오/확실하지 않다
My_Favorite=좋아
Not_save=저장되지 않음
Alarm_time=알람 시간
Alarm_time_main=알람 메인 스트림
Alarm_time_sub=알람 서브 스트림
Please_enter_name=이름을 입력하세요.
Please_check_channel=채널 선택
Check_channel_failed=32채널 이상 선택할 수 없습니다.
Nat_status=클라우드 상태
SDK_NAT_STATUS_DISENABLE=닫은
SDK_NAT_STATUS_PROBING=DNS 검출
SDK_NAT_STATUS_CONNECTING=서버 연결
SDK_NAT_STATUS_CONNECTED=연결 성공
Stream_setting=스트림 설정
Reversal=반전
Horizontal_inversion=수평 반전
Record_main=메인스트림 녹음
Record_sub=서브스트림 녹음
Wifi_Connect_Failed2=연결 실패 권한을 확인하시길 바랍니다.
Is_Cover=덮어쓰기
System_wifi_setting=To system settings ->
Is_Cover_Content=동영상 용량이 가득 차면 가장 오래된 비디오를 하나씩 삭제합니다.
Total_Capacity=총 용량
Residual_Capacity=잔여 용량
Not_Support_No_SN_See_Push=푸시 기록은 장치의 일련번호를 지원하지 않습니다.
Direct_Device_Searching=장치 검색, 기다려주십시오
Direct_Device_Linking=장치%s지금 링크중 기다려주세요.
Input_Direct_Device_Pwd=암호를 입력하세요
EE_MNETSDK_NOTSUPPORT=Device not supported
EE_READ_FILE=네트워크 불안정, 파일을 가져오기 실패
EE_DVR_SDK_NOTVALID=잘못된 요청
EE_DVR_NO_INIT=시스템 초기화되지 않은 것입니다
EE_DVR_ILLEGAL_PARAM=잘못된 매개 변수
TR_Check_Phone_WiFi=Check if the mobile wifi is connected to the monitoring device hotspot
EE_DVR_INVALID_HANDLE=잘못된 핸들
EE_DVR_SDK_UNINIT_ERROR=오류로 SDK 깨끗
EE_DVR_SDK_TIMEOUT=연결 네트워크 타임 아웃, 다시 시도하십시오
EE_DVR_SDK_NET_ERROR=네트워크 연결에 실패
EE_DVR_SDK_OPEN_FILE_ERROR=파일을 열지 못했습니다
EE_DVR_DEV_VER_NOMATCH=데이터는 정확하지 않습닏.  이 버전과 매치가 안됩니다.
EE_DVR_SDK_NOTSUPPORT=이 버전은 지원하지 않습니다.
EE_DVR_OPEN_CHANNEL_ERROR=채널을 여는데 실패
EE_DVR_CLOSE_CHANNEL_ERROR=채널을 닫는데 실패
EE_DVR_SUB_CONNECT_ERROR=미디어 서브 연결을 설정하는 데 실패
EE_DVR_SUB_CONNECT_SEND_ERROR=미디어 서브 연결 통신에 실패
EE_DVR_NATCONNET_REACHED_MAX=최대 비디오 링크
EMSG_ON_MEDIA_NET_DISCONNECT=The network is abnormal,disconnect
EE_AS_REGISTE_BY_EMAIL_CODE3=사용자 이름 이미 그에 의해 등록
EE_AS_SYS_NO_VALIDATED_REGISTER_EXTEND_CODE3=사용자 이름 이미 그에 의해 등록
EE_AS_REGISTE_BY_EMAIL_CODE4=인증 코드 오류
EE_AS_CHECK_PWD_CODE3=인증 코드 오류
EE_AS_FORGET_PWD_CODE4=메시지 실패 보내기
EE_AS_REGISTER_CODE4=인증 코드 오류
APP_TYPE_ERROR=APP 유형의 오류
SEND_DATA_ERROR=데이터 에러 보내기
AUTHCODE_ERROR=인증 코드 가져 오기 에러
XPMS_UNINIT=초기화되지 않음
EE_DVR_OPT_VALIDATE_ERROR=구성 검증 실패
Server_Response_Error=서버 응답 오류
Parameter_Error=매개 변수 오류
Phone_Number_Exist=전화 번호 사용
Reached_Max_Message_Number=전화번호는 매일 세개 이상의 메시지를 보낼 수 없습니다.
Send_Message_Failure=메시지 실패 보내기
Send_Message_Success=메시지 성공 보내기
Registration_Code_Verification_Error=등록 코드 검증 오류
New_Password_Wrong=새 암호는 요구 사항을 충족하지 않습니다
Old_Password_Wrong=이전 암호 잘못
Phone_Number_Not_Exist=전화 번호는 존재하지 않다
Interface_Verification_Failed=인터페이스 확인 실패
Verification_Code_Error=인증 코드 오류
Error_Prompt=오류 프롬프트
Detail_Information=상세 정보
Error_code=에러코드:
EE_DVR_NOPOWER=이 설정을 지원하지 않습니다
EE_DVR_USER_LOCKED=사용자가 잠겼습니다.
EE_DVR_USER_IN_BLACKLIST=사용자가 방문 할 수 없습니다.
EE_DVR_USER_HAS_USED=이 사용자는 기록되었다.
EE_DVR_USER_NOT_LOGIN=사용자가 로그인하지 않습니다.
EE_DVR_ACCOUNT_INPUT_NOT_VALID=사용자 입력은 불법입니다
EE_DVR_ACCOUNT_OVERLAP=복제 인덱스
EE_DVR_ACCOUNT_OBJECT_NONE=개체가 존재하지 않습니다
EE_DVR_ACCOUNT_OBJECT_IN_USE=개체 사용
EE_DVR_ACCOUNT_SUBSET_OVERLAP=범위 부분 오버
EE_DVR_ACCOUNT_PWD_NOT_VALID=비밀번호 에러
EE_DVR_ACCOUNT_PWD_NOT_MATCH=암호가 일치하지 않습니다.
EE_DVR_ACCOUNT_RESERVED=예약 계정
EE_DVR_OPT_RESTART=설정 저장후 응용 프로그램 다시 시작해야 합니다.
EE_DVR_OPT_REBOOT=시스템을 재부팅하십시오
EE_DVR_OPT_FILE_ERROR=파일 쓰기 오류
EE_DVR_OPT_CAPS_ERROR=구성 기능은 지원하지 않습니다
EE_DVR_OPT_CONFIG_NOT_EXIST=구성이 존재하지 않습니다
EE_DVR_OPT_CONFIG_PARSE_ERROR=구성 분석 오류
EE_DVR_CTRL_PAUSE_ERROR=실패 일시 중지
EE_DVR_SDK_NOTFOUND=파일을 찾을 수 없습니다
EE_DVR_CFG_NOT_ENABLE=구성은 사용할 수 없습니다
EE_DVR_DECORD_FAIL=디코딩 실패
EE_DVR_SOCKET_ERROR=연결에 실패
EE_DVR_SOCKET_CONNECT=연결에 실패
EE_DVR_SOCKET_DOMAIN=도메인 이름 실패
EE_DVR_SOCKET_SEND=데이터를 전송하는 데 실패했습니다
EE_DVR_ARSP_DEVICE_Online=장치 온라인
EE_DVR_ARSP_NO_DEVICE=장치가 오프라인 상태입니다
Connection_Number_Reached_MAX=연결 수가 최대에 도달
EE_DVR_ARSP_BUSING=서비스가 바쁨니다.
EE_USER_EXIST=사용자가 이미 존재합니다
EE_DVR_CONNECT_AGNET=제한된 연결을 하였거나 액세스 서버 실패
EE_DVR_CONNECT_FAILE=서버 검색 실패
EE_LOGIN_ERROR=장치를 연결하는 데 실패,  장치가 온라인인지 아닌지 확인하십시오.
EE_AS_REGISTER_CODE3=사용자 이름은 (는) 이미 등록되었습니다
EE_AS_REGISTE_BY_EMAIL_CODE6=등록 실패
EE_ACCOUNT_USERNAME_HAS_BEEN_REGISTERED=사용자 이름은 (는) 이미 등록되었습니다
EE_AS_SYS_SEND_BINDING_EMAIL_CODE2=사용자 이름이 존재하지 않습니다
EE_MEDIA_CONNET_REACHED_MAX=Media video links reach the maximum and access is limited
EE_DVR_MEDIA_CHN_NOTCONNECT=Digital channel is not connected
EE_ACCOUNT_DEVICE_ADD_MAX_LIMIT=The number of devices under the account exceeds the maximum limit
EE_NET_SEND=Network send error
CloudVideo=클라우드 저장
Login_Failure=로그인 실패
User_Exsit=사용자 존재
EE_MC_FOUND=장치 검색 성공
Press_again_exit=다시 누르면 종료
Add_dev_s=성공적으로 장치 추가
EE_NOT_FOUND_CD=기록 파일이 없습니다.
EE_DVR_CONNECT_DEVICE_ERROR=Device offline
EE_NOT_FOUND_ALARM_INFO=알람 정보가 없습니다.
Play_completed=재생이 종료
Play_Opening=여는중…
Play_Buffering=버퍼링…
Press_down_exit=데이터 다운로드 완료시 종료
VideoSquare=영상 사각형
equipment_no_more=더 이상 온라인 장비
equipment_not_access=온라인 장비에 없다. 다른 지점을 다시 시도
getpicture=사진 가져 오기
hardloading=하드로딩
serial_number=시리얼넘버:
click_rate=속도 클릭:
online_number=온라인 번호:
click_rate_history=지난시간 클릭:
power_op=전원 스위치
usb_op=USB 스위치
light_op=라이트 스위치
realtime_capture=실시간 캡처
timer_task=일반 작업
on=켜다
power_time_task=작업 시간 전원
light_time_task=작업 시간 조명
usb_time_task=작업 시간 USB
otherMinute=기타
setDelayTime=지연 시간을 설정해주세요
opened=열림
completed=완료
newTask=새 작업
updateTask=업데이트 작업
trunOn=켜다
onTime=시간 켬
offTime=시간 끔
repeatWeekly=반복 | 주간
repeatone=한 번 반복
selectTime=시간 선택
min=최소
repeat=반복
never=안한다
week=주
today=오늘
monday=월요일
tuesday=화요일
wednesday=수요일
Thursday=목요일
friday=금요일
saturday=토요일
sunday=일요일
deleteTask=작업을 삭제하시겠습니까?
TotalEnergy=총 에너지 :
TotalTime=총 시간:
EnergyOfThisMon=월요일 활성:
TimeOfThisMon=월요일 시간:
EnergyRecently=최근 에너지:
TimeRecently=최근 시간:
DeviceType=최근 시간:
DevicePower=장치 전원:
DevicePowerSet=장치파워설정
Power_null=전원은 비워 둘 수 없습니다！
DevicePowerUnit=단위 W
Refresh_code=새로 고침 코드
Generate_code_failed=생성 코드는 실패
workrecord=기록
device_code=장치 코드
code_tip=소켓을 제어하려면이 코드를 스캔
weixinpengyou=친구
pengyouquan=순간
no_alarm_type=알 수 없음
have_alarm_info=새로운 알람 정보가 있습니다.
workset=전원 설정
degree=정도
Remote_Type=원격 유형(%1$s)
device_input_too_long=입력 내용이 너무 길다
device_input_too_long_failure=장치 이름이 너무 길어서 변경 실패
devname_is_empty=개발자 이름은 비워 둘 수 없습니다.
modify_devname=장치 이름을 수정
remote_name=원격 컨트롤러 이름：
modify_remote_name=수정된 원격 컨트롤 이름
Remote_Pair_Prompt=원격 제어 중요한 팁
Confirm_Remote_Pair_Content=페어링 버튼을 클릭 한 후, 5 초 동안 원격 A 또는 B 버튼을 누른 후 페어링을 해제.
Confirm_Remote_Pair_Tip=(10m 원격 제어 거리)
Pair=페어
Matching=매칭
Pair_Timeout=페어 시간 초과
No_Support_Remote=상기 장치는 원격 제어 기능을 지원하지 않는다
No_Support_Wireless=이 장치는 (433) 기능을 지원하지 않는다
Json_Parse_F=JSON 데이터 구문 분석 오류
Pair_Error=페어링 오류 리모콘 A 또는 B 키 일치 여부를 확인해주십시오
Get_F=실패
EE_USER_NO_DEV=장치가 존재합니다.
Door_Magnet=문 자석
Bracelet=Bracelet
Remote_Control=원격 제어
Smoke_Detector=연기 감지
Indoor_Curtain_Detector=실내 감지
Infrared_Detector=적외선 감지
Gas_Detector=가스 감지
Device_List2=장치 추가
Device_List3=편집 장치
Add_Remote_Device_Successful=장치 이름을 수정하세요 성공적으로 장치 추가
Share_Direct_Fail=공유를 지원하지 않는 다이렉트 모드
qr_scan_tips=당신은 상자에 바코드를 자동으로 스캔 할 수 있습니다
Open_device_first=구성이 완료 기다린 후 장치를여십시오
Func_Record_Mode=녹화 모드
Func_Record_Always=항상 기록
Func_Record_Never=절대 기록
Func_Record_Link=알람 비디오
No_flash=플래시 없음
Equipment_Break=장치 핫스팟 연결이 끊어
Notice_Flow=현재의 모바일 네트워크를 사용에 있어 데이터를 주위
Download_List=다운로드 목록
EE_CLOUD_DEV_MAC_BACKLIST=디바이스 일련 번호가 블랙리스트
EE_CLOUD_DEV_MAC_EXSIT=디바이스 일련 번호가 이미 존재
EE_CLOUD_DEV_MAC_EMPTY=장치 시리얼 번호가 비워짐
EE_CLOUD_DEV_MAC_INVALID=장치 시리얼 번호가 형식에 올바르지 않습니다
EE_CLOUD_DEV_MAC_UNREDLIST=허용 목록이 없음
EE_CLOUD_DEV_NAME_EMPTY=장치 이름은 비워 둘 수 없습니다
EE_CLOUD_DEV_USERNAME_INVALID=장치 이름의 형식이 올바르지 않습니다
EE_CLOUD_DEV_PASSWORD_INVALID=장치 암호의 형식이 올바르지 않습니다
EE_CLOUD_DEV_NAME_INVALID=장치 이름의 형식이 올바르지 않습니다
EE_CLOUD_PARAM_INVALID=매개 변수 이상
EE_CLOUD_USERNAME_NOTEXIST=사용자 이름이 존재하지 않습니다
EE_CLOUD_SERVICE_ACTIVATE=서비스 열기 실패
EE_CLOUD_SERVICE_UNAVAILABLE=클라우드 스토리지는 열리지 않습니다
EE_CLOUD_AUTHENTICATION_FAILURE=사용자 이름이나 암호가 실패
register_code_error=인증 코드 오류
binding_failure=결합 실패
already_binding_mobile=전화 번호 결합
EE_AS_PHONE_CODE1=매개 변수 오류
EE_AS_PHONE_CODE5=120S 내에서 한 번 보내기
EE_AS_PHONE_CODE6=전화 번호와 이름이 일치하지 않습니다
EE_AS_RESET_PWD_CODE4=입력 한 두번의 새 암호는 일치하지 않습니다.
EE_AS_GET_PUBLIC_DEV_LIST_CODE=서버 응답 실패
EE_AS_UPLOAD_LOCAL_VIDEO_CODE1=업로드 파일이 없습니다
EE_AS_UPLOAD_PHOTO_CODE1=업로드 된 파일을받지 못했습니다
Alarm_Wireless=알람
From_Wirelese=당신의 메시지
EE_START_TALK=인터콤은 열려있다
EE_DSS_NOT_SUP_MAIN=HD를 열지 않았다
EE_TPS_NOT_SUP_MAIN=HD 비디오를 지원하지 않습니다
DSS_Video_Hint=DSS 비디오 열 성공!
RPS_Video_Hint=RPS 비디오 열 성공!
RTS_P2P_Video_Hint=RTS_P2P 비디오 열 성공!
RTS_Proxy_Video_Hint=RTS_Proxy 비디오 열 성공!
XTS_P2P_Video_Hint=XTS_P2P 비디오 열 성공!
XTS_Proxy_Video_Hint=XTS_RELAY 비디오 열 성공!
XTC_P2P_Video_Hint=XTC_P2P 비디오 열 성공!
XTC_Proxy_Video_Hint=XTC_RELAY 비디오 열 성공!
Video_Hint=비디오 열 성공!
Default_Language=언어
Language_Auto=자동
Simplified_Chinese=简体中文
Traditional_Chinese=繁體中文
English=English
Korean=한국어
Spanish=Español
Portuguese=Português
Turkish=Türkçe
French=Français
Russian=русский
Italian=Italia
German=Deutsch
Japanese=日本語
Flush_Device=새로 고침
synctime=장치 시간
Time_Syn_Prompt=클릭 동기화 장치 및 핸드폰 시간
Time_Syn_Failure=시간 동기화 실패
Time_Syn_Success=시간 동기 성공
Refresh_too_often=새로 고침 너무 자주
Device=장치
NvrNoVideo=프론트엔드 부재중 동영상 원본!
No_Video=없다.
Camera_Disabled=카메라를 사용할 권한이 없습니다->프라이버시->hicctv 앱이 카메라에 액세스 할 수 있도록 카메라를 선택합니다.
NO=NO
sure=YES
Message=메시지
Channel_number=채널번호
Set_date=셋팅
Go_Setting=셋팅
Select_Date=날짜 선택
I_Know=I got it
Not_Found=찾을 수 없음
Delete_Success=삭제 성공
Delete_Failed=삭제 실패
Device_Recording_Whether_Stop=현재 장치는 녹화중 스티림 변경을 할것인가?
Changing_stream_and_stoping_record=기록을 중지하고 스티림을 변경한다
Start_Talk_Failed=대화 시작 실패
MemoryWarning=메모리 경고
Push_Function_disabled=푸시 기능 비활성화
Info_Error3=잘못된 일련 번호
Request_Data=요청자료
APNS_Notification=푸시 알림
Get_image_Failed=영상실패
Current_Wifi_Name=와이파이
No_Wifi_Connection=와이파이 연결 아님
Wifi_Type=와이파이 구성
Make_Sure_Indicator_Light_Is_Blinking_Slowly=표시 등 천천히 깜박임 만들기
Security_Model=보안 모델
No_Security_Model=보안 모델 아님
Check_Step=작업 완료 확인
Configure_Failed=구성 실패
can't_deep_config=구성 할수 없음
WIFI_SET_ERROR=Current network state xià long time no success configuration equipment, recommends you switch for straight even mode for configuration equipment \n steps: \n1) with thimble light plug equipment behind configuration hole (SET) until led out \n2) waiting equipment automatically heavy Kai entered AP mode (led always) \n3) switch to phone system wireless configuration interface [set-> wireless LAN], select equipment WIFI (default password: 1234567890) \n4) again switch back application, click \" Confirm \"
Quick_configurate=빠른 구성
Deep_Config=전문가 구성('SET' 버튼 필요안함)
click_here=여기클릭
Warm_prompt=프롬프트
Device_Configure_Success_Waiting_For_Restart=장치 구성 성공 재시작을 기다리는중
WIFI_Configre_Success_Waiting_For_Device_Show=WIFI 구성성공, 나타나는 장치를 기다리는중
Sending_WIFI_Infomation=WIFI 정보 전송
Config_Failed1=구성 실패, 랜이름이 맞는지 확인하세요
Config_Failed2=만약 같지 않다면, 설정으로 이동 한 다음 로컬 검색을 할수 있는 올바른 무선랜을 연결합니다.
Configure_Success_Add_The_Device=구성 성공 그리고 장치 추가
Link___=링크...
UNLink___=연결 해제...
Get_APSN_Token_failed=APSN 실패
warning=경고
Download_failed,ReLoad?=다운로드 실패, 다시 시도?
Request_List_Failed1=사용자 인증 실패!
Request_List_Failed2=장비가 온라인 상태가 아니다
Request_List_Failed=요청 목록 실패
Start_Time=시작 시간
End_Time=종료 시간
Transmit_Mode_Without_This_Function=이 전송 모드 기능은 지원하지 않는다
Can_not_use_HD_in_this_mode=이 모드에서 HD를 사용할 수 없습니다
This_mode_can_not_open_multi-channel=이 모드는 멀티 채널을 열 수 없습니다
deep_config_tips=자세한 설정\자세한 설정을 하기전에, 장치 핫스팟으로 휴대 전화의 현재 무선랜을 전환하십시오
Ignore=무시
Enter=입력
Latest_Version=최신 버전
Upgrade_Equipment=업그레이드 장치
New_Version=새 버전
New_Version_If_Upgrade=연결된 장치는 업그레이드를 할 수 있습니다. 업그레이드 하시겠습니까?
To_upgrade_equipment=장치를 업그레이드
resource_download=다운로드
upgrading=업그레이드중
Copy_The_Serial_Number=시리얼넘버 복사
Shared=다른사람과 공유
Equipment_Update=장치 업데이트
Resource_Download=다운로드
Is the latest version=최신 버전입니다
Checking the device version=디바이스 버전 확인
Equipment to restart success=장치 리부팅 성공
Equipment upgrade is complete, is restarted=장치 업그레이드 완료되면 다시 시작
You have the new version can upgrade of connected devices, whether to upgrade?=당신의 장치는 업그레이드를 하시겠습니까?
Are_you_sure_to_delete_device2=당신은 장치를 삭제 하시겠습니까?
Change_DEVPassword=비밀번호 변경
old password=이전 암호
new password=새로운 암호
oldPassword=이전 암호
checkPassword=새로운 암호확인
the old password is not correct=비밀 번호가 올바르지 않음
Flip_Vertical=수직 뒤집기
Flip_Horizontal=수평 뒤집기
Set_image_cfg=이미지 구성 설정
Mirror_flip=거울 반전
Search_File=파일 검색
H264_DVR_NO_CONNECT_FRONT=H264 DVR NO CONNECT FRONT
prompt=신속한
Camera access restricted=카메라 액세스 제한
Is the largest unit!=가장 큰 단위!
Is the smallest unit!=가장 작은 단위!
Bind_Server_ERR=서버 연결 실패
P2P_Suceess=네트워크 모델:P2P 모드
IP_Success=네트워크:IP모드
IP_Mode=IP모드
EE_SQL_ERROR=SQL 오류
update_status=업데이트 상태
Other_Load_Way=다른 로그인 방법
AP_Connect=AP 연결
Stream_type=스티림 유형
Time_Synchronous=시간 동기
Please check your WIFI setting and make sure you are connecting AP device.=당신의 와이파이 설정을 확인하고, AP 장치 연결되어 있는지 확인하십시오
Send_to_phone=전화로 보내기
Info_Error2=잘못된 문자 포함
Peripherals_Management=주변장치
Add_Peripherals=주변장치추가
Modify_the_peripherals_name=주변 이름을 수정
Existing_equipment_with_the_same=같은 장치 존재
Account_number_is_wrong=잘못된 계정
You enter the character is too long=입력 문자 너무 깁니다
No button operation=아무 버튼 조작 없음
According to the wrong button=잘못된 버튼에 따라
This feature is not yet open, stay tuned=이 기능은 아직 열려 있지 않습니다
Input the name cannot contain Spaces=입력이름에는 공백을 포함 할 수 없습니다
Please_wait_for_time_file_downlaoding_patiently=파일 다운로드 시간에는 기다려주십시오
days=날짜
No_More_Viedo=더 이상 비디오가 없습니다
Catch_Video_failed=비디오 실패
Catch_Video_success=비디오 성공
Stream_Enabled_Error=스트림을 활성화 하십시오
Share_App=공유 앱
press_talk=press_talk_en.png
press_talk_selected=press_talk_selected_en.png
btn_tool_hd_blue=btn_tool_hd_blue
btn_tool_hd=btn_tool_hd
assistant=assistant_EN.png
1E=1_sp.png
2E=2_sp.png
3E=3_sp.png
4E=4_sp.png
btn_HD=btn_HD_E.png
btn_SD=btn_SD_E.png
Successs_Copy=복사
Please_connect_wireless_networks=무선 네트워크를 연결하십시오
Probing=탐색
MJRefreshHeaderIdle=새로고침 드롭 다운
MJRefreshHeaderPulling=즉시 새로고침을 늦추다
MJRefreshHeaderRefreshing=데이터 새로고침...
last_update=마지막 업데이트
camera_time_info=카메라 시간과 로컬 시간은 클라이언트가 일치하지 않으면, 시간 동기를 클릭하세요
Click_on_the_synchronous_equipment_and_mobile_phone_time=휴대전화와 장치 시간 동기화 클릭
synchronous_time_success=시간 동기화 성공
User_Exists=사용자 이미 존재합니다
err_detail=오류 정보
Device_Exist=장치 추가 실패, 이미 동일한 이름 또는 시리얼번호가 존재합니다
Push_Blind=주인은 내가 막았다
Push_Motion=주인, 살피어서 잰다 까지 물체는 이동
Push_Wireless=주인, 주변 장치 상황 시
vr_preview=VR 미리 보기
Log_pattern=로그 모드 진입
Config=설정
Empty=비우기
Last=마지막
Local_show=로컬 보이기
Local_storage=로컬 저장소
Upload_internet=업로드 네트워크
EE_DSS_NO_VIDEO=이전 트랙 보기
EE_DSS_BAD_REQUEST=잘못된 요청
EE_DSS_XMCloud_Request=장치 정보를 가져오는 데 실패했습니다. 기다려 주십시오
EE_DSS_XMCloud_InvalidStream=DSS 형식 오류 메시지
EE_SERVER_INTERNAL_ERROR=서버 오류
get_captcha=코드
hint_captcha=코드
register_code_null=패스워드 못 비어 있습니다!
register_code_get_once=모른다? 오늘 네트워크 문제, 당신을 못 받아 검증 소식, 어쩔 수 없이 제발 다시 한 번 확인 요청
register_code_get_failure=당신 아직 받지 인증 코드?상인 또 게으름, 건너뜀 이메일 인증 수 있습니다. 계속 완료 등록 완료, 후기 다시 이메일 인증
register_code_get_success=받았어요
Continue_register=계속 등록
Forget_Pwd=비밀번호
forget_username_is=당신의 이름 은:
Reset_S=암호 초기화 성공
other_problem=다른 문제
start_preview=미리 보기 시작했다
preview_number_not_legal=미리 보기 금액 적법하지 않다
login_other_problem=로그인 문제를 만나면?
refresh_device_list=지금 목록 새로 고침...
function_development=이 기능은 개발 중입니다
waiting_buffering=지금 버퍼. 잠시만 기다려 주십시오...
record_failure_pause=동영상 재생 녹화 상태에 있다
capture_failure_pause=비디오 플레이어의 상태를 캡처
EE_MENTSDK_NOFILEFOUND=어떤 일 녹화 날짜를 전환하지
Please input UserName=사용자 이름을 입력하세요
Get_Channle=채널 정보를 획득...
Common=보통
btnToolHD_sel=btnToolHD_sel_en.png
btnToolHD_nor=btnToolHD_nor_en.png
RPS_Mode=RPS
No_Support_Fish=Don‘t support Fisheye
If you change your current language, you need to close and reopen push switches, to ensure the proper push language=현재 언어를 변경하는 경우. 푸시 스위치를 닫았다가 다시 열어야합니다. 적절한 푸시 언어 보장
code=확인 코드
PTCHA for failed Please retry=확인 코드를 얻기 위해 실패, 다시 시도하십시오
fill_Info=등록 정보는 비워 둘 수 없습니다
illegal_username=사용자 이름이 유효하지 않습니다（4 ~ 32 문자, 숫자 및 밑줄, 또는 8 개 이하 순수한 사용자 이름, 순수한 숫자를 지원하지 않는다）
edit_pwd_error5=암호 요구 사항을 충족하지 않음, 8-32 자리의 비밀번호는 숫자와 문자를 포함해야합니다
EE_AS_PHONE_CODE2=전화 번호가 이미 등록 됨
EE_AS_PHONE_CODE3=메시지 전송 횟수
EE_AS_PHONE_CODE4=전송할 수 없으니 다시 시도해 주십시오
EE_AS_CHECK_USER_REGISTE_CODE3=사용자가 이미 등록되었습니다
EE_AS_EIDIT_PWD_CODE5=비밀 번호와 다른 새 암호를 입력하십시오
EE_AS_SYS_NO_VALIDATED_REGISTER_CODE3=사용자 이름이 이미 등록되었습니다
EE_AS_SEND_EMAIL_CODE3=이메일이 이미 등록되었습니다
EE_AS_RESET_ERROR=초기화 실패
EE_AS_SEND_EMAIL_FOR_CODE5=메일 존재하지 않습니다
EE_AS_CHECK_CODE_FOR_EMAIL3=이메일 확인 코드 오류
EE_AS_SEND_EMAIL_FOR_CODE6=메일 박스와 사용자 이름이 일치하지 않음
EE_AS_RESET_PWD_BY_EMAIL4=핸드폰 번호나 이메일이 존재하지 않는다
EE_AS_FORGET_PWD_CODE5=이 번호는 등록되지 않았습니다.
forget_psd=비밀 번호 분실
check_code=인증
Sure_Reset=초기화 확인
error_email_formatter=잘못된 메일 형식
Please input password=비밀 번호를 입력해 주세요
Not Support Multi Channel=다중 채널을 지원하지 않음
please_Choose_Channle_To_Play=재생하려면 채널을 선택하십시오.
the_Channle_Count_cannot_beyond32=동시에 재생되는 통로는 16개보다 더 많을 수 없다.
the_Channle_Count_cannot_beyond4=동시에 재생되는 통로는 4개보다 더 많을 수 없다.
open_For_The_Time_Being=이 기능은 잠시 열리지 않는다
Please_enter_your_email_address=이메일을 입력하십시오
enter_phoneNum=핸드폰 번호를 입력해 주세요
bind_email_address=이메일로 묶기
bind_phoneNumber=핸드폰 번호를 바인딩 하다
email_address_bind=메일 박스 연동
success_bind_email_address=메일 박스 묶기 성공
fail_to_get_code=인증 번호를 가져올 수 없습니까?
EE_AS_SYS_SEND_BINDING_EMAIL_CODE3=이 이메일은 이미 연동되었다
forget_code_null=라이센스 코드는 비워 둘 수 없습니다!
bindingSuccess=바인딩 성공
fish_eye_VR=어안 VR
Configure_success_wait=구성에 성공, 잠시 기다려주십시오!
Configure_success_wait_reboot=구성의 성공! 다시 부팅 한 후에 적용
No records=기록 없음
EE_ACCOUNT_HTTP_USERNAME_PWD_ERROR=잘못된 아이디 혹은 비밀번호입니다.
EE_ACCOUNT_VERIFICATION_CODE_ERROR=인증 번호가 틀렸다
EE_ACCOUNT_PASSWORD_NOT_SAME=암호가 일치하지 않음
EE_ACCOUNT_USERNAME_IS_EMPTY=사용자 이름이 비어 있습니다
EE_ACCOUNT_PASSWORD_IS_EMPTY=암호가 비어 있습니다
EE_ACCOUNT_COMFIRMPWD_IS_EMPTY=암호가 비어 있음
EE_ACCOUNT_PHONE_IS_EMPTY=핸드폰 번호가 비어 있어요
EE_ACCOUNT_USERNAME_FORMAT_NOT_CORRECT=사용자 이름 형식이 올바르지 않음
EE_ACCOUNT_PASSWORD_FORMAT_NOT_CORRECT=암호 형식이 잘못되었습니다
EE_ACCOUNT_COMFIRMPWD_FORMAT_NOT_CORRECT=암호 형식이 정확하지 않음을 확인하십시오
EE_ACCOUNT_PHONE_FORMAT_NOT_CORRECT=핸드폰 번호 형식이 틀렸습니다.
EE_ACCOUNT_PHONE_IS_EXIST=핸드폰 번호가 이미 존재합니다.
EE_ACCOUNT_PHONE_NOT_EXSIT=핸드폰 번호가 존재하지 않는다
EE_ACCOUNT_EMAIL_IS_EXIST=메일이 이미 존재합니다
EE_ACCOUNT_OLD_PASSWORD_ERROR=원래 암호 오류
EE_ACCOUNT_USERID_IS_EMPTY=사용자 ID가 비어 있습니다
EE_ACCOUNT_EMAIL_IS_EMPTY=이메일 비워짐
EE_ACCOUNT_EMAIL_FORMATE_NOT_CORRECT=메일 형식이 잘못되었습니다
EE_ACCOUNT_DEVICE_ILLEGAL_NOT_ADD=추가적인 동의를 허용하지 않는다.
search_dev_result_exist=장치가 이미 존재합니다
EE_ACCOUNT_DEVICE_ALREADY_EXSIT=장치가 이미 존재합니다
EE_ACCOUNT_DEVICE_CHANGE_IFNO_FAIL=장치 정보 변경 실패
EE_ACCOUNT_DEVICE_UUID_ILLEGAL=장비 UUID 매개 변수 오류
EE_ACCOUNT_DEVICE_USERNAME_ILLEGAL=장치 사용자 이름 매개 변수 오류
EE_ACCOUNT_DEVICE_PASSWORD_ILLEGAL=장치 암호 매개 변수 오류
EE_ACCOUNT_MESSAGE_INTERFACE_CHECK_ERROR=문자 메시지 인증이 실패하였습니다.
EE_ACCOUNT_MESSAGE_INTERFACE_PARM_ERROR=문자열 인터페이스 인자가 잘못되었습니다.
EE_ACCOUNT_MESSAGE_TIME_MORE_THAN_THREE=문자 메시지 전송 횟수, 휴대 전화 번호 하루에 세번밖에 안된다
EE_ACCOUNT_SEND_CODE_PHONE_NUMBER_FAIL=문자 메시지 전송 횟수, 휴대 전화 번호 하루에 세번밖에 안된다
EE_ACCOUNT_MESSAGE_SEND_ERROR=보내기 실패, 나중에 다시 시도하십시오
EE_ACCOUNT_MESSAGE_SEND_OFTEN=너무 자주 전송하기 때문에 120초 간격으로 해주세요.
EE_ACCOUNT_HTTP_SERVER_ERROR=서버 장애
EE_ACCOUNT_CERTIFICATE_NOT_EXIST=인증서가 존재하지 않습니다
EE_ACCOUNT_HTTP_HEADER_ERROR=정보 오류
EE_ACCOUNT_CERTIFICATE_FAILURE=인증서 비활성화
EE_ACCOUNT_ENCRYPT_CHECK_FAILURE=유효성 검사 오류
EE_ACCOUNT_PARMA_ABNORMAL=매개 변수 오류
EE_AS_SEND_EMAIL_CODE1=인터페이스 검증 실패
EE_AS_SEND_EMAIL_FOR_CODE1=인터페이스 검증 실패
EE_AS_SYS_SEND_BINDING_PHONE_CODE6=보내지 못했습니다
EE_AS_SYS_BINDING_PHONE_CODE5=확인 코드 오류
EE_AS_SYS_SEND_BINDING_PHONE_CODE8=120초 한 번만 전송
EE_AS_SYS_SEND_BINDING_PHONE_CODE4=문자 메시지 하루에 발송 횟수 제한(각 번호 발송 인증 정보 하루에 세번 보낼 수 있음)
EE_AS_SYS_SEND_BINDING_PHONE_CODE3=핸드폰 번호는 이미 연동되었다.
EE_MC_PEERCONNET_REACHED_MAX=비디오 링크가 최대 값에 도달하고 새로운 Nat 비디오 링크를 허용하지 않습니다.
Please_Reset_Wifi_Password=wifi 암호를 다시 설정하십시오. 암호가 30자 이상이 되지 않습니다
phone_num=핸드폰 번호나 이메일을 입력해 주세요
exit_registration=탈퇴자 등록을 끝내시겠습니까?
PhoneOrEmailError=정확한 핸드폰 번호나 이메일 주소를 입력해 주세요
ReGetRegCode=다시 가져오기
next=다음
get_code_success=인증 번호 성공적으로 획득되었습니다.
UserInputTip=4-32 한자/문자/숫자 조합
Password1=암호
PwdInputTip=8-32 문자 / 숫자 / 특수 문자
PwdInputTip2=설정한 비밀 번호와 일치하는 것을 설정하십시오.
Jump_RegCode=건너뛰기(나중에 다시 핸드폰이나 메일을 전송하거나 메일을 보냅니다)
Jump_RegCode_No_Phone=건너뛰기
resetPassword=암호화 초기화
submit=제출
IP_Address=IP 주소
subMask=서브넷 마스크
GateWay=게이트웨이
auto_get=자동획득
network_set=유선 인터넷
networkWifi_set=무선 네트워크
format_recorrect=형식이 정확하지 않다
SpareAddress=보조 DNS
Not_config=잠시 좀 안 된다. 설정을 다시 설정 가져오기
start_playback=재생 시작
max_replay_count=최대 재생 횟수 를 4
set_language=언어전환
general=공통
account_privacy=계정 보안
set_stream=전환 스트림
user_manager=사용자 관리
binding_account=바인딩 계정
moblie_error=핸드폰 번호를 입력하십시오. 정확한 혹은 편지함
RegCode_Send_To=패스워드 이미 보내기:
net_disabled=인터넷 사용 불가능, 부디 네트워크 설정
already_register_mobile=핸드폰 번호 이미 그에 의해 등록
sms_send_failure=보내기 실패 인증 코드 입력 올바른지 확인하십시오.
EE_EMAIL_HAS_REGISTERED_CODE=메일박스 이미
Chinese=简体中文
Network_Error=네트워크 오류
already_register_username=사용자 이름 이미 등록
edit_pwd_error4=원시 비밀번호
ignore_advertisement=클리어 카피
forget_code_send_more3=문자 메시지 횟수를 제한하기 위해 매일 보내 넘어 (등록 확인 정보를 한 하루를 보내도록 각 숫자 만 "세 가지를 보내)
SmartAnalytics=지능형 경보 분석
triangle=삼각형
rectangle=구형
pentagon=펜타곤
L_type=L 형
concave_type=오목한
customize=관습
Choose_direction_alert=경고 방향을 선택
Alert_direction=경고 방향
right_to_left=오른쪽에서 왼쪽으로
left_to_right=왼쪽에서 오른쪽으로
left_and_right=양방향
Into_alert=경고에
Leave_alert=경고를 남겨주세요
Two-way_alert=양방향 경고
application_scenario=시나리오
Show_traces=표시 흔적
Alert_type=경고 유형
Perimeter_alert=경계 경보
Alert_line=방역 선
Alert_area=경고 영역
Item_care=관리 항목
Items_stay=항목 거주
Items_stolen=해적 항목을 이동
Video_diagnosis=영상 진단
Scene_change_detection=장면 전환 검출
Signal_loss_detection=신호의 손실의 검출
Clarity_detection=선명도 감지
Human_disturbance_detection=간섭 탐지
Garage_stays=차고 좌초
No_parking=주차 금지
corridor=복도
Jewelry=보석류
Baby_room=아기 방
sanctum=연구
Revoked=해지
smart_analyze=통찰력
smart_analyze_alarm=지능형 경보 분석
smart_analyze_show_trace=displays traces
smart_analyze_alert_type=alert type
smart_analyze_alert_boundary=perimeter alert
alert_line=cordon
alert_area=alert area
smart_analyze_goods_tend=article care
goods_retention=items remain
stolen_goods=objects stolen
smart_analyze_video_judge=video diagnosis
smart_analyze_scene_change=scene transform detection
smart_analyze_signal_loss_detection=signal missing detection
smart_analyze_sharpness_detection=clarity detection
smart_analyze_alarm_time=알람 시간
scene_change_set_success=성공을 설정! \ N 장면 변화는 알람 메시지를받을 때
signal_loss_detection_set_success=성공을 설정! \ 신호 N의 부족이 검출되는 경우, 수신 된 경보 메시지
sharpness_detection_set_success=성공을 설정! \ N 선명도를 검출 할 때, 수신 된 경보 메시지
type_alert_area=alert area
type_alert_line=cordon
type_goods_retention=items remain
type_stolen_goods=objects stolen
smart_analyze_line_left=from left to right
smart_analyze_line_middle=two-way alert
smart_analyze_line_right=from right to left
smart_analyze_shape_triangle=triangle
smart_analyze_shape_rectangle=oblong
smart_analyze_shape_pentagram=Pentagon
smart_analyze_shape_l_sel=L shape
smart_analyze_shape_concave=concave
smart_analyze_shape_customize=custom
smart_analyze_store_car=garage entrance
smart_analyze_forbidden_parking=no parking
smart_analyze_corridor=corridor
smart_analyze_jewelry=jewelry
smart_analyze_baby_room=Baby room
smart_analyze_book_room=Bookstore
quit_alert_area=종료 경고 영역
double_direction_alert=양방향 경고
enter_alert_area=알림 영역 진출
smart_analyze_revoke=취소
smart_analyze_revert=Revert
alert_line_trigger_direction=경고 트리거 방향
boundary_alert_direction=경고 방향
application_scenarios=시나리오
TALK_ALAREADY_START=다른 사용자 인터콤 기능을 사용하고 있습니다, 나중에 다시 시도하십시오
EE_MNETSDK_TALK_ALAREADY_START=다른 사용자 인터콤 기능을 사용하고 있습니다, 나중에 다시 시도하십시오
forget_mobile_non=이 번호는 등록되지 않았습니다.
EE_AS_REGISTE_BY_EMAIL_CODE5=이메일이 이미 등록되었습니다
downloading=다운로드
Click_Install=설치를 클릭합니다
video_not_play=동영상이 재생되지 않았다
binding_wx_account=혹시 바인딩 XM 계정?
goto_binding=바인딩로 이동
log_in_now=지금 로그인
enter_acount_has_register=등록 된 계정을 입력하십시오.
wechat_login_failed=요청 권한 부여에 실패했습니다.
window_hd_error=HD 모드 다중 창 모드로 전환 지원하지
Please_refresh=연결 실패
searchDeviceFromWiFi=*동일한 LAN에서 장치 검색
wifi_config_tip=*표시 등 천천히 깜박임 만들기,녹화기 연결된 무선 wifi 공유기와 휴대전화 거리를 2m로 내로 해보십시오\n오랜 시간동안 SET 버튼을 눌러 빠르게 깜박이게합니다(일부 제품 연결하기 위해서 필요하다)
LongPress_Rank=장치의 오른쪽에있는 단추를 길게 누르면 장치를 끌어서 정렬 할 수 있습니다
forget_password_error_dialog_tip=만약 비밀번호를 잊어버린다면 저에게 복구 출하 후 다시 추가 설정
input_password=비밀번호 입력
appEventHumanDetectAlarm=인간 탐지
multichannel_not_support=비디오 캡처 및 비디오 레코딩은 혼합 코드 멀티 뷰어 미리보기에서 지원되지 않습니다.
privacy_Key=개인 정보 보호 정책
I_Have_Agreed=나는 동의했다.
Please_agree_privacy_policy=개인 정보 보호 정책을 읽고 동의하십시오.
haveRead=나는 읽었다.
wx_alrm_push=WeChat Alarm Push
Please_install_WeChat_client=먼저 WeChat 클라이언트를 설치하십시오.
Tips=프롬프트
Weixin_login=WeChat
Weixin_alarm=WeChat 경보
Register_Directly=계정을 잘 보지 않으시겠습니까?
no_account=계정을 수퍼 보이지 않습니까?
no_account_jf=계정을 수퍼 보이지 않습니까?
Register_directly=직접 등록
Immediately_Bind=즉시 바인딩
Bind_Account_Tip=클릭 한 번으로 로그인하기 전에 바인딩을 완료하십시오!
bind_account=계정 바인딩
request_google_login_failed=Request Google+ API Failed !!
Cancel_Account=계정 삭제
Is_Cancel_And_Input_Pwd=현재 계정을 삭제 하시겠습니까? 계정 비밀번호를 입력하고 확인을 클릭하십시오!
Cancel_Account_Success=계정 삭제
Cancel_Account_Failed=이 계정은 삭제할 수 없습니다.
Code_Send_To_Mobile_No=계정을 삭제하려면 인증 코드가 필요합니다. 휴대 전화 번호로 인증 코드가 전송되었습니다.
Code_Send_To_Email=계정을 삭제하려면 인증 코드가 필요합니다. 이메일에 인증 코드가 전송되었습니다.
If_Cancel_Account_Than_Delete_All_Devices=계정을 삭제하면 해당 계정의 모든 기기가 삭제됩니다.
Human_detection=Human Detection
Auto_model=자동
Open=열기
Close=휴관일
Auto_Color=자동
open=열기
close_Color=휴무일
timing=타이밍
Smart_Night_Vision=소리와 가벼운 경찰
General_Night_Vision=적외선 야간 투시경
Full_Color_Vision=스타 라이트 풀 컬러
Intelligent_sensitivity=감도
Intelligent_duration=연속 점등 시간
Intelligent_level_Height=높음
Intelligent_level_Middle=매체
Intelligent_level_Low=낮음
Intelligent_switch=지능형
Video_Model=이미지 설정
Setting_Color=색상
Setting_White_Black=흑인과 백인
bulb_switch=전구 스위치
open_time=영업 시간
close_time=휴관일
timing_switch=시간 스위치
Start_And_End_Time_Unable_Equal=시작 시간과 종료 시간은 같을 수 없습니다.
Atmosphere=대기 등
Glint=음악과 함께
content_is_null=피드백은 비워 둘 수 없습니다.
network_not_connected=네트워크가 연결되지 않았습니다.
Link_Information=연락처 정보
cannot_send_email=cannot send email
please_check_email_setting=please check e-mail setting
edit_email=edit email
save_email=save email successfully
send_email=send email
save_or_send_email_failed=save or send email failed
email_title=피드백 정보
feedback_send_success=의견을 제출했습니다. 사용에 감사드립니다.
feedback_title=피드백
feedback_information=질문이나 의견을 설명해주십시오.
feedback_link_information=일반적으로 사용되는 연락처 (회신을 위해 전화, QQ, 사서함 등)
feedback_send_log=동시에 문제 로그를 보내십시오.
feedback_send=보내기
feedback_upload_log=정보를 제출하고 있습니다 ...
feedback_send_failed=보내지 못했습니다!
logfile_not_exists=로그 파일이 존재하지 않습니다.
notification_notes=참고 : 피드백 메시지는 메일 사용 권한을 전송해야합니다.
WeChat_Alarm_Follow_public_Tip=Keyword "雄迈智能生活" has been copied,in the WeChat search box paste and search
WeChat_Jfeye_Alarm_Follow_public_Tip=Keyword "巨峰智能生活" has been copied,in the WeChat search box paste and search
UserName_illegal=사용자 이름이 잘못되었습니다. 사용자 이름을 다시 입력하십시오.
userName_Nopower=Username has no access rights,please modify the username
low_memory=Low Memory
Device_make_Source=Source
set_Password_Issue=Set the security question
dont_support_video=The player dont support this video, will switch to another
QR_code=QR code
resetPwdByQRCode=scan QR then find back the password
resetPwdByIP=Get code for finding the password
resetPwd_answer_devQuestion=Answer the security question to find the password
reset_Dev_Pwd=Find back the password
code_send_to=Code was sent to
pls_check=Please check your
way=method
skill_dev_code_reset_pwd=Scan device QR then find back the password
local_network_reset_pwd=find back the password under the LAN
skill_QR_code=Scan the QR
dev_not_support_reset_devPwd=The device don’t support the function
question=question
combination_of_English_and_numbers=*must contain letter and number
get_code_pls_wait=Please wait, getting the code
only_admin_support_reset_devPwd=only support re-set the password of admin, whether to continue re-setting the password?
get_config_pls_wait=Please wait, getting the config
answer_error=answer is error
pls_dev_Restart=Limited, please reboot the device then try again
reset_pwd_fail=Failed to find password
reset_dev_pwd=Find back the Pwd
pls_choose_different_question=pls choose different question
Choice_question=pls choose question
pls_Choice_question=pls choose question
pls_complete_question_reset_devPwd=Please fill in the below the information in order to re-set the password
record_above_information_in_location=please record the information and put in safe place
code_send_APP=When APP sacnning, code will be sent to the APP
code_send_connect_way=code Will send to the email
pls_choose_way=Please choose the verification way
saft_question=security question
my_contact_information=my contact information
contact_information=contact information
contact_information_is_empty=Contact cannot be empty
answer=answer
sure_answer=Confirm the answer
Ways_of_identifying=verification way
reset_devPwd_Verification_code=Retrieve password with code
verification_code_populated=auto-fill in code
Illegal_QR_code=Illegal QR code
pls_complete_the_answer=Please complete the answer of the question
phone=cell-phone number(Mainland China)
answer_different=The answer entered twice are different
pls_input_answer=Please enter the answer to the question
pls_input_answer_again=Please enter the answer again
pls_input_contact_way=Please enter your contact information
set_safe_question=Set Security Question
device_pwd_is_empty=The device password is empty, please set the device password!
set_now=Set now
set_later=Set later
only_admin_support_set_question=only support set the security question of admin, whether to continue setting the security question?
broadcast=Broadcast
Equipment_intercom=Equipment intercom
Intercom_type=Intercom Type
Front_end_camera_intercom=Front-end camera intercom
release_version=Release Version
IPC_Linkage=IPC Linkage
Alarm_Sound=Alarm Sound
Alarm_Light=Alarm Light
Alarm_Sound_Type=Alarm Sound Type
Custom_Recording=Custom Recording
Need_Custom_Recording=Want to customize the recording?
Start_Recording_Tips=Click the button to start recording
Recording_Tip=recording...
Listen_Or_Save_Recording=Click the button to listen to the recording \n or save directly or re-record
Full_Channel=Full Channel
Select_Channel_To_Send=Please select the channel to send
Channel_Cannot_Empty=Channel number cannot be empty
Record_saved_success=Recording saved successfully
Go_select_channel=Go to select channel to send
Album=Album
open_alarm=Open Successfully
close_alarm=Close Successfully
Device_Reboot=Device Reboot
Sure_to_restart_device=Are you sure to restart the device?
Rebooting_wait=Rebooting..., please wait
SaveAlbumfail=h265 Video don't support saving to mobile album
appEventAlarmLocal=LocalAlarm
appEventAlarmNet=NetAlarm
appEventVideoMotion=MotionDetect
appEventVideoLoss=LossDetect
appEventVideoBlind=BlindDetect
appEventVideoSplit=VideoSplit
appEventVideoTour=VideoTour
appEventVideoTitle=VideoTitle
appEventBackup=StorageFailureackup
appEventComm=Comm
appEventAlarmEmergency=Emergency
appEventDecConnect=DecConnect
appEventAlarmManual=ManualAlarm
appEventNewFile=NewFile
appEventVideoAnalyze=VideoAnalyze
appEventIPCAlarm=IPCAlarm
appEventSpeedAlarm=SpeedAlarm
appEventStorageFailure=GSensorAlarm
appEventStorageLowSpace=StorageLowSpace
appEventStorageNotExist=StorageNotExist
appEventStorageReadErr=StorageReadError
appEventStorageWriteErr=StorageWriteError
appEventNetAbort=NetAbort
appEventIPConflict=NetIPConflict
appEventShutdown=ShutDown
appEventReboot=Reboot
appEventUpgrade=Upgrade
appEventLoginFailed=LoginFailed
appEventSerialAlarm=SerialAlarm
appEventPIRAlarm=PIRAlarm
appEventConsSensorAlarm=ConsSensorAlarm
appEventWordDetect=WordDetect
appEventBlurCheck=BlurCheck
appEventPlateDetect=PlateDetect
appEventFaceDetect=FaceDetect
appEventDoorLockNotify=DoorLockNotify
appEventDoorLockAlarm=DoorLockAlarm
appEventDoorLockCall=DoorLockCall
appEventReserveWakeAlarm=ReserveWakeAlarm
appEventFeedAlarm=FeedAlarm
appEventForceDismantleAlarm=ForceDismantleAlarm
appEventLocalIO=LocalIO
appEventFaceDetection=FaceDetection
Set_Dev_Audio_Volume=Loudspeaker Volume
tab_videosquare=비디오 광장
Face_Detection=Face Detection
Account_binding_please_wait=Account binding,please wait
reset=reset
set_preset=프리셋 포인트 설정
stop_tour=stop tour
set_tour=크루즈 설정
get_tour=오픈 크루즈
Enter_Preset_No=Enter Preset No
Enter_Tour_No=Enter Tour No
add_preset=Add Preset
No_Support_Tour=The device does not support cruise！
No_Tour=The device has not set a cruise route yet.
set_success=Set Successfully!
sure_to_delete_preset=Confirm to delete the preset point??
sure_to_delete_tour=Confirm to delete the cruise?
preset_point_number_too_large=Preset point number should not be greater than 255
Store=Store
current_channel_num=current channel number
import_Face_Image=import face image
information_deletion_please_wait=information deletion, please wait
are_you_sure_to_delete_face_information=are you sure to delete face information
personal_information=Personal Information
gender=gender
female=female
male=male
name=name
pls_enter_name=pls enter name
year_of_birth=year of birth
pls_enter_year_of_birth=pls input year of birth
Please_enter_the_face=Please record the face
Please_enter_the_left_side_face=Please record the left side face
Please_enter_the_right_side_face=Please record the right side face
Retake_photo=Retake
enter_face_first=Please record your face first
Preset_Set_Error=Input error,please try again
Saving_please_wait=Saving,please wait
Mobile_subscription_alarm=Mobile subscription alarm
NO_Support_preset=The device does not support preset functions
Intelligent_Alarm=지능형 경보
Advanced_Settings=고급 설정
Video_Management=비디오 관리
Video_Download=비디오 다운로드
normal_Alarm=일반 경보
Picture=Picture
Yesterday=Yesterday
Year=Year
Month=Month
Day=Day
Exceed_Limit=Exceed Limit
APP_PUSH=APP Push
WX_PUSH=Wechat Push
Download_to_share=Please click to download the image and then share
more_function=more
TR_wifi_config_tip1=*Refers to searching for devices under the same LAN
TR_psw_tips=Please input the wifi password
TR_wifi_tips=Please connect to wifi before continuing
TR_forgot_psw_tips=Forgot your device password?
advanced_set=고급 설정
english=English
zh_cn=简体中文
zh_tw=繁体中文
ko_kr=한국어
fr=Français
tr_TR=Türkçe
ru=русский
pt=Português
ita=Italiano
es=El español
de=Deutsch
ja-=日本語
Device_Serial_Name=장치 이름 또는 일련 번호
tab_local=내
tab_images=휴대폰 이미지
dev_num_tip_left=현재 총계
dev_num_tip_right=장치
sort_mode=정렬 모드
sort1=장치 ID
sort2=온라인 / 오프라인
sort3=맞춤 정렬
sort4=사용 빈도
StorageFailure=Storage failure
StorageNotExist=Storage not exist
can_not_get_camera=Failed to open the camera
get_preset=사전 설정 목록
TR_Check_Update=check update
TR_Img_Path=Image Path
TR_Video_Path=Video Path
TR_Type_Not_Support_Share=Currently selected file type does not support sharing for the time being
TR_Share_Tip=Choose one of picture or video to share
TR_Share_Video_Tip=Only one video can be shared at a time.
TR_Allow_Notifications=Allow Notifications
TR_Not_support_H265=H265 video not support
TR_delete_pic_tip=No file to delete
TR_Search_Device_Hint=Please enter the device name or serial number
TR_Current_Device_Num=There are currently %s devices
TR_No_Device_Hint=Click on the "+" in the upper right corner to add the device\n to see the world together!
TR_Invalid_QR_Code=Invalid QR code
TR_Smart_Alarm=스마트 알림
TR_Open_Notification_Hint=You have not opened the notification right now, you will not receive the alarm message notification, now go to open?
TR_Select_Info_Hint=Please select the information you want to delete first.
TR_Delete_Info_Hint=Deleting information %s, please wait
TR_Unsubscribe=Unsubscribe...
TR_Logout=Logging out...
TR_EE_DVR_MEDIA_CHN_NOTCONNECT=Digital channel is not connected
TR_EE_ACCOUNT_DEVICE_ADD_MAX_LIMIT=The number of devices reaches the upper limit
TR_DevPwd_length_limit=The length of device's  password should be less than 16 bits
TR_firmware_update_prompt=Do not do other operations in upgrade process \n \n Do not drop out or press Home key \n \n to confirm upgrade?
TR_Important_Hints=Important hints!
TR_click_later=Cancel
TR_click_now=Ok
TR_download_success_click=After upgrade finished, click OK to exit, return to the main menu
TR_download_failure_click=Upgrade failed, please click retry!
TR_is_upgrading=Upgrading
TR_already_latest_local_update=Local Upgrade
TR_uploading=Uploading
TR_Complete=Complete
TR_retry=Retry
TR_H264+=Smart Coding
TR_About_Device=소개
TR_commit_description_of_question=Please describe your problem
TR_Send_LOG_Msg_To_XM_Email_Tips=The message is sent in addition to the feedback content, including the user's related commands for the App operation, such as account login, device login, the process of opening monitoring, and other interactive information. Do you agree to send this kind of information?
TR_Send_LOG_Tips=*If you have any questions, please contact the seller, here is only the problem log collection
TR_Please_Open_Flash=The environment is too dark, please turn on the flash
Bell_Customize=Custom Voice
TR_Text_To_Voice=Text to speech
TR_Please_Enter_Right_Alarm_Tip=Please enter the correct alarm prompt language (only supports Chinese, not with special characters such as.,!?)
TR_Please_Enter_Right_Alarm_Tips=Please enter the correct alarm prompt language (only supports Chinese, not with special characters such as.,!?)
TR_File_Size_Exceed_Max_Size=File size exceeds the maximum limit
operator_failed=Operation failed
TR_Sex_Female=Female
TR_Sex_Male=Male
TR_Transformation=Transformation
TR_Record_Prompt=Record prompt tone
TR_Audition=Listen
TR_Upload_Prompt_Voice=Upload prompt tone
Upload_Audio_To_Device_Tip=Will the recorded audio be uploaded to the device?
Upload_F=Upload Failed
Upload_S=Upload Success
TR_Please_Enter_Alarm_Tips=Please input alarm prompt
TR_Invalid_File=Invalid file
Recording_Times_Not_DURATION=Recording time should be at least more than 1 second
TR_NO_SubStream=Does not support sub stream playback
TR_HD=HD
TR_SD=SD
TR_Save_File_To_Phone_Album=Saved to mobile photo album successfully
TR_welcome_tips_phone=You need to open the phone permission to enter the app. Click settings to open it
TR_welcome_tips_storage=You need to open the storage permission to enter the app. Click settings to open it
No_Permission_CAMERA=No permission to use the camera!\n\nUse camera function when scanning QR code!
No_Permission_RECORD_AUDIO=No recording rights!\n\nMicrophone function is required for Talking!
No_Permission_ACCESS_FINE_LOCATION=No Location Permissions!\n\nUse to get WiFi status list!
TR_No_Permission_WRITE_EXTERNAL_STORAGE=No SD Card read and write permissions!\n\nSave media files!
TR_No_Permission_WRITE_EXTERNAL_STORAGE2=No SD Card read and write permissions!\n\nGet the file list to use!
TR_No_Permission_MANAGE_ALL_FILES=No access to all files!\n\nGet the file list to use!
LineLogin=Line
TR_advertisement=Advertisement
TR_Have_Files_Need_Restore=There are important files to recover
TR_Have_Files_Need_Restore_Tips=There are important files that need to be recovered. Do you want to restore them now?
TR_Files_Restore=Files recovery...
TR_Show_App_Privacy_Tips=Thanks for choosing XMEye. We have formulated the <a href='%s'>"Service Agreement"</a> and <a href='%s'>"Privacy Policy"</a> in accordance with relevant laws. Please read carefully and fully understand the relevant terms and conditions to understand our rules for handling your personal information and the purpose of applying for permission. If you agree, please click "Agree" and start accepting our service
TR_Service_Agreement=Service Agreement
TR_Privacy_Policy=Privacy Policy
TR_Privacy_Tips_One=Thanks for choosing XMEye. We have formulated the
TR_Privacy_Tips_Two=in accordance with relevant laws. Please read carefully and fully understand the relevant terms and conditions to understand our rules for handling your personal information and the purpose of applying for permission. If you agree, please click "Agree" and start accepting our service.
TR_And=and
TR_Not_Agree_Service_Agreement_And_Privacy_Policy_Tips=Sorry, you can continue to use the software after agreeing to the service agreement and privacy policy terms
TR_Agree=Agree
TR_Disagree=Disagree
TR_Click_Register_Next_Step_Agree=Click "코드" to agree
TR_Pls_Change_Dev_Pwd=Please set password!
TR_Rules_Of_Dev_Pwd=password contains 8-16 characters, and must include letters and numbers
TR_Dev_Pwd_Edit_Error=Password is incorrect, password contains 8-16 characters, and must include letters and numbers
TR_Encrypt_Transmission=Encrypted transmission
TR_Need_Modify_User_Pwd_Tips=To ensure the security of your account, please change your password regularly!
EE_ACCOUNT_USER_TOO_MANY_INCORRECT_LOGINS=The user logged in too many times by mistake, and locked the account for ten minutes
EE_ACCOUNT_USER_VERIFICATION_LIMIT_EXCEEDED=Too many user verification code errors, and the verification code is invalid,Please wait 10 minutes and try again.
EE_ACCOUNT_USER_REQUEST_TOO_FREQUENT=Requests are too frequent, please try later
TR_Set_Dev_User_Not_Empty=Device login name cannot be empty
TR_Error_User_Tip=The login name does not meet the requirements and cannot contain %s content
TR_Dlg_Dev_Set_User_Pwd_Tips=If you forget your login or password, please restore the factory settings and add again!
TR_Dev_User_Input_Tip=The login name is 4-15 characters, case sensitive
TR_Dlg_User_Pwd_Error_Title=Please enter the device login name and password
TR_Dlg_User_Exit_Title=Please enter the device login name
TR_Set_Dev_User_Tip=PPlease set the device login name
TR_Set_Dev_Pwd_Tip=Please set the device login password
TR_Set_Dev_Login_Info_Title=For your device security, please modify the device login information
TR_Pwd_Same_Username=Password cannot be the same as the user name
TR_Dev_Login_UserName=Device login name
TR_Device_Exist=Already exists
TR_Pwd_Level_Low=Password strength: low
TR_Pwd_Level_Middle=Password strength: middle
TR_Pwd_Level_High=Password strength: strong
EE_ACCOUNT_ADD_OPEN_APP_FAIL=Add authorization failed
EE_ACCOUNT_CANCELLATION_CODE=Verification code required for account cancellation
EE_ACCOUNT_CERTIFICATE_CHECK_FAILED=App not initialized
EE_ACCOUNT_CERTIFICATE_FAILURE=Certificate invalidation
EE_ACCOUNT_CERTIFICATE_NOT_EXIST=The certificate does not exist
EE_ACCOUNT_COMFIRMPWD_IS_EMPTY=the confirmed password is empty
EE_ACCOUNT_CONNECTION_FAILURE=connection failed
EE_ACCOUNT_DECRYPT_ERROR=Decryption error (third party login code error or AES encryption and decryption error)
EE_ACCOUNT_DELETE_OPEN_APP_FAIL=Failed to delete authorization
EE_ACCOUNT_DEV_CLOUD_STORAGE_SUPPORT=Support cloud storage
EE_ACCOUNT_DEV_CLOUD_STORAGE_UNSUPPORT=Cloud storage is not supported
EE_ACCOUNT_DEV_CONFIRM_PASSWORD_FAIL=Confirm password verification failed
EE_ACCOUNT_DEV_NEW_PASSWORD_FAIL=New password verification failed
EE_ACCOUNT_DEV_NICKNAME_FAIL=Device alias verification failed
EE_ACCOUNT_DEVICE_ADD_MAX_LIMIT=The number of devices under your account has reached the maximum, and no more devices can be added.
EE_ACCOUNT_DEVICE_ADD_NOT_UNIQUE=The device has been added to other accounts
EE_ACCOUNT_DEVICE_CHANGE_IFNO_FAIL=Device information modification failed
EE_ACCOUNT_DEVICE_DELETE_FAIL=Failed to delete device
EE_ACCOUNT_DEVICE_EXTEND_ILLEGAL=Device extended field parameter exception
EE_ACCOUNT_DEVICE_ILLEGAL_NOT_ADD=The device is illegal and cannot be added
EE_ACCOUNT_DEVICE_PASSWORD_ILLEGAL=The device password parameter is abnormal
EE_ACCOUNT_DEVICE_PORT_ILLEGAL=Abnormal device port parameters
EE_ACCOUNT_DEVICE_USERNAME_ILLEGAL=The device user name parameter is abnormal
EE_ACCOUNT_DEVICE_UUID_ILLEGAL=The UUID parameter of the device is abnormal
EE_ACCOUNT_EMAIL_FORMATE_NOT_CORRECT=The mailbox format is incorrect
EE_ACCOUNT_EMAIL_IS_EMPTY=Email is empty
EE_ACCOUNT_ENCRYPT_CHECK_FAILURE=Generate key verification error
EE_ACCOUNT_HTTP_HEADER_ERROR=Request header information error
EE_ACCOUNT_HTTP_SERVER_ERROR=Server failure
EE_ACCOUNT_IP_NOT_ALLOWED=IP address is not allowed to access
EE_ACCOUNT_LOGINTYPE_INVALID=Invalid login mode
EE_ACCOUNT_MAIL_SIGN_FAIL=Email signature failed
EE_ACCOUNT_MESSAGE_TIME_MORE_THAN_THREE=Each cell phone text messages can only send three times a day
EE_ACCOUNT_NEW_PWD_FORMAT_NOT_CORRECT=The new password is not in the correct format
EE_ACCOUNT_NODE_ERROR=unknown error
EE_ACCOUNT_OPEN_DEVICE_LIST_NULL=Device list not found or empty
EE_ACCOUNT_OPEN_USER_LIST_NULL=User list not found or empty
EE_ACCOUNT_PARMA_ABNORMAL=Parameter exception
EE_ACCOUNT_PASSWORD_IS_EMPTY=the password is empty
EE_ACCOUNT_PHONE_FORMAT_NOT_CORRECT=Phone number format is not correct
EE_ACCOUNT_PHONE_IS_EMPTY=phone number is empty
EE_ACCOUNT_REG_FAIL=Registration failed
EE_ACCOUNT_RESET_OPEN_APP_SECRET_FAIL=Failed to reset app secret
EE_ACCOUNT_SEND_CODE_PHONE_INTERFACE_FAIL=SMS interface verification failed, please contact us
EE_ACCOUNT_SEND_CODE_PHONE_NUMBER_FAIL=Exceeded the limit of sending times per day (SMS can only be sent three times within 24 hours)
EE_ACCOUNT_SEND_CODE_PHONE_PARAM_FAIL=SMS interface parameter error, please contact us
EE_ACCOUNT_SETMA_FAIL=Failed to transfer the device master account to another user. Check whether the user has the device and the user has the device master account authority
EE_ACCOUNT_SYN_TYPE_APP_FAIL=Single authorization synchronization failed (the reason may be that the type parameter is not correct, or the cloud product line does not return)
EE_ACCOUNT_TNOT_SUPPORT=Not support
EE_ACCOUNT_TOKEN_ERROR=Token error
EE_ACCOUNT_TOKEN_EXPIRED=Token expired
EE_ACCOUNT_TOKEN_NO_AUTHORITY=Token has no permission
EE_ACCOUNT_UPDATE_OPEN_APP_FAIL=Failed to modify authorization
EE_ACCOUNT_USER_CP_PASS_NOTALLOWED=The user has no permission
EE_ACCOUNT_USER_EDIT_USERNAME_NOAUTH=No permission to modify
EE_ACCOUNT_USER_FAIL_FB_BIND=User failed to bind Facebook
EE_ACCOUNT_USER_FAIL_GG_BIND=User failed to bind Google
EE_ACCOUNT_USER_FAIL_LINE_BIND=Line account binding failed
EE_ACCOUNT_USER_FAIL_MAIL_BIND=Email binding failed
EE_ACCOUNT_USER_FAIL_PHONE_BIND=Phone binding failed
EE_ACCOUNT_USER_FAIL_WX_BIND=User binding failed
EE_ACCOUNT_USER_HAS_WX_BIND=Wechat has bound users
EE_ACCOUNT_USER_IS_NOT_EXSIT=user name does not exist
EE_ACCOUNT_USER_NOT_FB_BIND=The user is not bound to Facebook
EE_ACCOUNT_USER_NOT_GG_BIND=The user does not have a Google binding
EE_ACCOUNT_USER_NOT_LINE_BIND=Line account not bound
EE_ACCOUNT_USER_NOT_WX_BIND=User unbound
EE_ACCOUNT_USER_SEND_CODE_FAIL_OR_MAXCOUNT=Send verification code more than the maximum number of times
EE_ACCOUNT_USERID_IS_EMPTY=The user ID is empty
EE_ACCOUNT_USERNAME_FORMAT_NOT_CORRECT=The user name format is not correct
EE_ACCOUNT_USERNAME_IS_EMPTY=the user name is empty
EE_ACCOUNT_VERIFICATION_CODE_IS_EMPTY=The verification code is empty
EE_ACCOUNT_WX_PMS_CLOSE_FAIL=Wechat alarm shutdown failed
EE_ACCOUNT_WX_PMS_OPEN_FAIL=Wechat alarm failed to open
EE_ADD_DEVICE_EXSIT_ERROR=Add device failed, same name or serial number of the device has already existed
EE_ALARM_CHECK_AUTHCODE_FAILED=Alarm authorization code error
EE_ALARM_NOT_SUPPORTED=This feature is not supported
EE_AS_CHECK_CODE_FOR_EMAIL3=Verification Code Error
EE_AS_CHECK_CODE_FOR_EMAIL4=Email does not exist
EE_AS_CHECK_USER_REGISTE_CODE=Server Response Failed
EE_AS_CHECK_USER_REGISTE_CODE1=Connector Verify Failed
EE_AS_CHECK_USER_REGISTE_CODE2=Incorrect Parameter
EE_AS_CHECK_USER_REGISTE_CODE3=User has Already Registered
EE_AS_FORGET_PWD_CODE3=Exceeded the limit of sending times per day (SMS can only be sent three times within 24 hours)
EE_AS_FORGET_PWD_COOE7=Only once can be sent during 120 seconds
EE_AS_GET_PUBLIC_DEV_LIST_CODE=Server Response Failed
EE_AS_LOGIN_CODE0=Send Successfully
EE_AS_PHONE_CODE0=Connector Verify Failed
EE_AS_PHONE_CODE1=Incorrect Parameter
EE_AS_PHONE_CODE2=Phone number has been already registered.
EE_AS_PHONE_CODE3=Beyond the limitation of text send times
EE_AS_PHONE_CODE4=Send failed, please try again
EE_AS_PHONE_CODE5=Only once can be sent during 120 seconds
EE_AS_PHONE_CODE6=Phone number and user name does not match
EE_AS_REGISTE_BY_EMAIL_CODE4=Verification Code Error
EE_AS_REGISTE_BY_EMAIL_CODE5=E-Mail has been registered
EE_AS_REGISTE_BY_EMAIL_EXTEND_CODE5=The email has been registered
EE_AS_RESET_ERROR=Reset failed
EE_AS_RESET_PWD_BY_EMAIL4=E-Mail does not exist
EE_AS_RESET_PWD_CODE4=New password you typed do not match
EE_AS_SELECT_AUTHCODE_CDOE1=Server Search Failed
EE_AS_SEND_EMAIL_CODE=Failed to send mail, please check the “Email” is correct
EE_AS_SEND_EMAIL_CODE3=This email has been registered
EE_AS_SEND_EMAIL_FOR_CODE5=Email does not exist
EE_AS_SEND_EMAIL_FOR_CODE6=E-Mail and user name does not match
EE_AS_SYS_BINDING_EMAIL_CODE5=This email number was bound
EE_AS_SYS_NO_VALIDATED_REGISTER_CODE3=User name has already been registered
EE_AS_SYS_SEND_BINDING_EMAIL_CODE3=This email number was bound
EE_AS_UPLOAD_LOCAL_VIDEO_CODE1=Lack Of Upload Files
EE_AS_UPLOAD_PHOTO_CODE1=Didn't receive uploaded files
EE_BCLOUD365_SERVER_ERROR=Server internal error
EE_BCLOUD365_SERVER_FORBIDDEN=No access
EE_BCLOUD365_SERVER_NOT_FOUND=non-existent
EE_BCLOUD365_SERVER_ROLE_NOT_EXIST=Role does not exist, role needs to be configured
EE_BCLOUD365_SERVER_UNAUTHORIZED=Unauthorized
EE_BCLOUD365_SERVER_USERNAME_PWD_ERROR=Wrong user name or password
EE_CLOUD_AUTHENTICATION_FAILURE=User name or password error
EE_CLOUD_CHANGEDEVINFO=Failed to edit device information
EE_CLOUD_DEV_MAC_BACKLIST=Device serial number is in black list
EE_CLOUD_DEV_MAC_EMPTY=Device serial number is blank
EE_CLOUD_DEV_MAC_EXSIT=Device serial number existed
EE_CLOUD_DEV_MAC_INVALID=Incorrect device serial number format
EE_CLOUD_DEV_MAC_UNREDLIST=White list does not exist
EE_CLOUD_DEV_NAME_EMPTY=Device name cannot be blank
EE_CLOUD_DEV_NAME_INVALID=Incorrect device name format. Include keyword
EE_CLOUD_DEV_PASSWORD_INVALID=Incorrect device password format
EE_CLOUD_DEV_USERNAME_INVALID=Incorrect device name format
EE_CLOUD_PARAM_INVALID=Invalid Parameters
EE_CLOUD_SERVICE_ACTIVATE=Service Active Failed
EE_CLOUD_SERVICE_UNAVAILABLE=Cloud Service Unavailable
EE_CLOUD_UPGRADE_INVALIDREQ=Failed, invalid request
EE_CLOUD_UPGRADE_LASTEST=Success, it is up to date, no need to update
EE_CLOUD_UPGRADE_SERVER=Failed, server internal error
EE_CLOUD_UPGRADE_SERVER_UNAVAIL=Failed. The server is temporarily unavailable
EE_CLOUD_UPGRADE_UNFINDRES=Failed, resource not found
EE_CLOUD_UPGRADE_UPDATE=Success, need update
EE_CLOUD_USERNAME_NOTEXIST=User does not exist
EE_DEV_IPC_NOT_ONLINE=Front end device offline
EE_COMMAND_INVALID=502 order does not conform to the law
EE_CREATE_FILE=Failed to create file
EE_DEV_NOT_LOGIN=Log In Failed
EE_DEVLOG_OPENTELNET=Failed to open telnet
EE_DISABLE_CONNECT_EXTRANET=Prohibit connection to the external network
EE_DSS_BAD_REQUEST=Invalid request
EE_DSS_DEVICE_NOT_SUPPORT=The front end does not support this stream
EE_DSS_MINOR_STREAM_DISABLE=This APP does not support playing mixed coding devices!
EE_DSS_NO_VIDEO=No Video
EE_DSS_NOT_SUP_MAIN=DSS does not support HD mode
EE_DSS_SQUARE_PARSE_URL=Failed to parse the video square URL returned by XM cloud
EE_DSS_XMCloud_ConnectHls=DSS failed to connect to HLS server
EE_DSS_XMCloud_InvalidParam=Get device DSS information through xm cloud
EE_DSS_XMCloud_InvalidStream=DSS Format error
EE_DSS_XMCloud_Request=DSS request Failure
EE_DSS_XMCloud_StreamInterrupt=DSS stream format parsing failed
EE_DVR_ACCOUNT_INPUT_NOT_VALID=Invalid Input
EE_DVR_ACCOUNT_OBJECT_IN_USE=Object In Use
EE_DVR_ACCOUNT_OBJECT_NONE=Object Not Existed
EE_DVR_ACCOUNT_OBJECT_NOT_VALID=Invalid Object
EE_DVR_ACCOUNT_OVERLAP=Index Overlap
EE_DVR_ACCOUNT_PWD_NOT_MATCH=Password Not Match
EE_DVR_ACCOUNT_PWD_NOT_VALID=Invalid Password
EE_DVR_ACCOUNT_RESERVED=Reserve Account
EE_DVR_ACCOUNT_SUBSET_OVERLAP=Subset Overlap
EE_DVR_ARSP_BUSING=Service Is Busy
EE_DVR_ARSP_NO_DEVICE=Device Offline
EE_DVR_CFG_NOT_ENABLE=Configuration is not enable
EE_DVR_CLOSE_CHANNEL_ERROR=Close Channel Error
EE_DVR_CONNECT_AGNET=Connection is limited or visit server failed
EE_DVR_CONNECT_DEVICE_ERROR=Device offline
EE_DVR_CONNECT_FULL=The number of server connections is full
EE_DVR_CONSUMER_OPR_SEARCHING=The device is being added
EE_DVR_CONSUMER_OPR_WRONG_KEY=Wrong key for remote control binding of consumer products
EE_DVR_CPPLUS_USR_PSW_ERR=APS customer special password error return value
EE_DVR_CTRL_PAUSE_ERROR=Pause Failed
EE_DVR_DEV_VER_NOMATCH=Data incorrect, maybe the version is not matched
EE_DVR_ERROR_BEGIN=Error value of transducing DVR
EE_DVR_FORBID_4G_REMOTE_VIDEO=Device is limited, unable to play
EE_DVR_GROUP_EXIST=The user group already exists
EE_DVR_GROUP_NOT_EXIST=The user group does not exist
EE_DVR_ILLEGAL_PARAM=Illegal Parameter
EE_DVR_INVALID_HANDLE=Invalid Handle
EE_DVR_LOGIN_ARGO_ERROR=Wrong encryption algorithm for user name and password
EE_DVR_LOGIN_NO_ADMIN=You can't login with admin after creating other users
EE_DVR_LOGIN_TOO_FREQUENTLY=Sign in too frequently, try again later
EE_DVR_MEDIA_CHN_NOTCONNECT=Digital channel not connected
EE_DVR_NAS_ALIVE=The path is in use and cannot be operated
EE_DVR_NAS_EXIST=The NAS address already exists
EE_DVR_NAS_REACHED_MAX=NAS has reached the maximum supported value, adding is not allowed
EE_DVR_NATCONNET_REACHED_MAX=Nat connect reached max
EE_DVR_NEED_REBOOT=Successful, the device needs to be restarted
EE_DVR_NO_INIT=System is not initialized
EE_DVR_NO_PTZ_PROTOCOL=PTZ protocol not set
EE_DVR_NO_SD_CARD=No SD card or hard disk
EE_DVR_NOPOWER=Invalid Settings
EE_DVR_OPEN_CHANNEL_ERROR=Open Channel Error
EE_DVR_OPT_CAPS_ERROR=Configuration do not support
EE_DVR_OPT_CONFIG_NOT_EXIST=Configuration not existed
EE_DVR_OPT_CONFIG_PARSE_ERROR=The device configuration parsing error, this configuration may not be supported
EE_DVR_OPT_FILE_ERROR=Write Files Error
EE_DVR_OPT_REBOOT=Reboot System
EE_DVR_OPT_RESTART=Application program need to be restarted after saving configuration
EE_DVR_PASSWORD_ENC_NOT_SUP=This encrypted login is not supported
EE_DVR_PASSWORD_NOT_VALID2=Wrong account password
EE_DVR_PASSWORD_NOT_VALID=Invalid Password
EE_DVR_PIRATESOFTWARE=Pirated equipment
EE_DVR_SDK_MEMORY_ERROR=Storage space insufficient
EE_DVR_SDK_NET_ERROR=Connect to network failed
EE_DVR_SDK_NOTFOUND=Files Not Found
EE_DVR_SDK_NOTSUPPORT=Version Not Supported
EE_DVR_SDK_NOTVALID=Request Illegal
EE_DVR_SDK_OPEN_FILE_ERROR=Open Files Failed
EE_DVR_SDK_TIMEOUT=Network connection timeout, please try again
EE_DVR_SDK_UNINIT_ERROR=Clean SDK Error
EE_DVR_SDK_UNKNOWNERROR=Unknown Error
EE_DVR_SOCKET_CONNECT=Connection Failed
EE_DVR_SOCKET_DOMAIN=DNS Failed
EE_DVR_SOCKET_ERROR=Connection Built Failed
EE_DVR_SOCKET_SEND=Data Sent Failed
EE_DVR_SUB_CONNECT_ERROR=Built sub connect error
EE_DVR_SUB_CONNECT_SEND_ERROR=Sub connect send error
EE_DVR_TCPCONNET_REACHED_MAX=TCP video link reaches maximum, new TCP video link is not allowed
EE_DVR_USER_HAS_USED=User Has Login
EE_DVR_USER_IN_BLACKLIST=User Visit Forbidden
EE_DVR_USER_LOCKED=The user is locked, please restart the device
EE_DVR_USER_NOT_EXIST=The user does not exist
EE_DVR_USER_NOT_LOGIN=User Not Login
EE_DVR_VIDEO_DISABLE=Decode Failed
EE_DVR_XMSDK_CONNECT_IS_FULL=The number of connections is full
EE_DVR_XMSDK_CONNECT_IS_TIMEOUT=connection timed out
EE_DVR_XMSDK_CONNECT_REFUSE=The connection server rejected the connection request
EE_DVR_XMSDK_HANDSHAKE_TIMEOUT=Network handshake timeout
EE_DVR_XMSDK_HEARTBEAT_IS_TIMEOUT=Heartbeat Timeout
EE_DVR_XMSDK_INIT_FAILED=Query server failed
EE_DVR_XMSDK_MSGSVR_ERRNO_DISCONNECT=The connection is broken
EE_DVR_XMSDK_NOT_CONNECT_TO_SERVER=Unable to connect to the server
EE_DVR_XMSDK_NOT_CONNECTED=Not connected
EE_DVR_XMSDK_OFFLINE=off-line
EE_DVR_XMSDK_QUERY_SERVER_TIMEOUT=Query server failed
EE_DVR_XMSDK_QUERY_STATUS_TIMEOUT=Query status timeout
EE_DVR_XMSDK_QUERY_WANIP_TIMEOUT=Time out for querying Internet information
EE_DVR_XMSDK_UNKOWN=unknown error
EE_EMAIL_HAS_REGISTERED_CODE=E-Mail has been registered
EE_FILE_IS_ILLEGAL=File is illegal
EE_HTTP_PWBYEMAIL_UNFINDNAME=There is no such user name
EE_ILLEGAL_PARAM=invalid parameter
EE_LOGIN_ERROR=Device connection failed, please confirm the device ID online or not
EE_MC_FOUND=Find Device successfully
EE_MC_MSGFORMATERR=Message format error
EE_MC_PIRATESOFTWARE=Pirated software
EE_MENTSDK_NOFILEFOUND=No pictures found
EE_MNETSDK_BACKUP_FAILURE=Backup to U disk failed
EE_MNETSDK_CAPTURE_PIC_FAILURE=Failed to capture
EE_MNETSDK_CHECK_FILE_SIZE=File size verification failed
EE_MNETSDK_DEV_IS_OFFLINE=Device may not exist
EE_MNETSDK_DEV_PTL=Some other users are using the intercom function. Please try again later!
EE_MNETSDK_DISCONNECT_ERROR=Disconnection failed
EE_MNETSDK_FILE_NOTEXIST=file does not exist
EE_MNETSDK_FILE_SIZE_LIMIT=File size limit exceeded
EE_MNETSDK_GET_LOGIN_ENC_INFO_RESULT=Get login encryption information without definite result (supported / not supported)
EE_MNETSDK_GETCONNECT_TYPE_ERROR=Failed to get connection type
EE_MNETSDK_HAS_CONNECTED=The device is connected
EE_MNETSDK_HEARTBEAT_TIMEOUT=Heartbeat Timeout
EE_MNETSDK_IS_LOGINING=Signing in
EE_MNETSDK_IS_UPGRADING=The device is being upgraded
EE_MNETSDK_NODEVICE=There is no storage device (U disk) or the device is not recording
EE_MNETSDK_NOTSUPPORT=Device not supported
EE_MNETSDK_QUERY_SERVER_FAIL=Query server failed
EE_MNETSDK_SERVER_STATUS_ERROR=Server initialization failed
EE_MNETSDK_STORAGE_IS_FULL=Device storage full
EE_MNETSDK_TALK_ALAREADY_START=Some other users are using the intercom function. Please try again later!
EE_MNETSDK_TALK_NOT_START=Intercom not on
EE_MNETSDK_USEREXIST=Device Existed
EE_NET_SEND=Network error (send failed)
EE_NEW_BUFFER=Failed to create cache
EE_NO_SUPPORTED=not support
EE_NOT_FOUND=Can't find
EE_NOT_FOUND_ALARM_INFO=No Alarm Message
EE_NOT_FOUND_CD=No Cloud Videos
EE_OBJ_NOT_EXIST=Object does not exist
EE_OBJECT_BUSY=Object busy
EE_OPEN_FILE=fail to open file
EE_PARAM_ERROR=Parameter error
EE_READ_FILE=Network condition is unstable, Read files error
EE_SDK_COMMON_NOT_SUP_RPS_VIDEO=RPS preview video is not supported
EE_SERVER_ERROR=An internal error on the server
EE_SERVER_INTERNAL_ERROR=An internal error on the server
EE_SET_DEFAULT_FAILED=Restore default failed
EE_SET_DEFAULT_REBOOT=Device restart required
EE_SET_DEFAULT_VALIDATEERROR=Illegal default configuration
EE_SQL_ERROR=SQL failure
EE_SYS_GET_AUTH_CODE=Get auth error
EE_TALK_ALAREADY_START=Intercom is on
EE_TALK_NOT_START=Intercom not on
EE_TPS_NOT_SUP_MAIN=Do not support switch to HD resolution
EE_UPGRADE_ALAREADY_START=Upgrade started
EE_UPGRADE_ALREADY_NEW=The front end device is up to date
EE_UPGRADE_DATA_ERROR=Upgrade data error
EE_UPGRADE_FAILED=Upgrade failed
EE_UPGRADE_FAILED_BUSY=Device busy or cloud upgrade server busy
EE_UPGRADE_FILE_ERROR=Upgrade file mismatch
EE_UPGRADE_IPC_FIRMWARE_CRACKED=The upgrade file has been modified and cannot be upgraded through the Internet
EE_UPGRADE_IPC_INVALID_COMPATIBLE=The compatible version number of the upgrade program is smaller than the current version number of the device. The device is not allowed to upgrade back to the old program
EE_UPGRADE_IPC_INVALID_FORMAT=The upgrade file format is not correct
EE_UPGRADE_IPC_INVALID_HARD_WARE=Hardware model mismatch
EE_UPGRADE_IPC_INVALID_VERSION=Invalid version
EE_UPGRADE_IPC_INVALID_WENDOR=Customer information does not match
EE_UPGRADE_IPC_INVALID_WIFI_DIRVER=The WiFi driver in the upgrade program does not match the WiFi network card currently used by the device
EE_UPGRADE_IPC_NETWORK=Network error
EE_UPGRADE_IPC_NO_ENOUGH_MEMORY=insufficient memory
EE_UPGRADE_IPC_NOT_SUPPORT_ABILITY=Upgrading this firmware requires special capabilities
EE_UPGRADE_IPC_NOT_SUPPORT_CUR_FLASH=Flash used by the device is not supported by the upgrade program
EE_UPGRADE_IPC_PART_FAIL=A partition upgrade failed
EE_UPGRADE_NO_POWER=The upgrade was started by another connection and cannot be stopped
EE_UPGRADE_NOT_START=Upgrade not started
EE_USER_CANCEL=User cancel
EE_USER_EXIST=User Existed
EE_VALUE_NOT_EXIST=Value does not exist
EE_VIDEOPLAY_URL_FindStream=Failed to get stream information
EE_VIDEOPLAY_URL_FindVideoStream=Failed to get video stream information
EE_VIDEOPLAY_URL_NULL=The URL is empty
EE_VIDEOPLAY_URL_Open=Failed to open
EE_VIDEOPLAY_URL_ReadStream=Unable to get video stream
EE_WRITE_FILE=Failed to write file
TR_Translation_Rules=翻译规则:所有的翻译都是TR开头的，命名按照驼峰规则(例：TR_Phone_Video=手机影像            放于最后)
Language_ja=韩语(请把该翻译置于最后)
